I would stay on 13.2.1 until 14.1.2 official which should be soon. Not sure it explains your exact problem, but there were various problems with 13.3 onward so I don’t think many people are using those.
I don’t remember the exact problems with 13.4, I know 13.3 broke alignment tone so it was dead to me. From: mailto:t...@franklinisp.net Sent: Tuesday, March 29, 2016 2:07 PM To: memb...@wispa.org ; af@afmug.com Subject: [AFMUG] New One - 450 AP Issue Ok Geeks, Just had a single 450 AP drop all it’s 430 Interop. SM’s over the past 24 Hrs. Tired of repeating myself a dozen times over and over again with Cambium support. It’s very simple. If you can solve it great. -AP has been working with 13.4 for 6+ months (actually really well) - All 450 sessions are still up - All 430 sessions are down and won’t reconnect - 430 SM’s will connect to other 450 AP’s normally - Power cycled AP. Unplugged it. Factory default and programmed. Different FW. Different power source. etc. - Same result. I say replace and RAM. Support says no, send the CNUT capture. Have not seen it before. New one for me. Cheers! Tyson Burris, President Internet Communications Inc. 739 Commerce Dr. Franklin, IN 46131 317-738-0320 Daytime # 317-412-1540 Cell/Direct # Online: www.surfici.net What can ICI do for you? Broadband Wireless - PtP/PtMP Solutions - WiMax - Mesh Wifi/Hotzones - IP Security - Fiber - Tower - Infrastructure. CONFIDENTIALITY NOTICE: This e-mail is intended for the addressee shown. It contains information that is confidential and protected from disclosure. Any review, dissemination or use of this transmission or its contents by unauthorized organizations or individuals is strictly prohibited.