Something is off in your config somewhere. I've got some meetings this morning, but I should be back to the NOC before noon. I've got 6 edgeswitches of various shapes and sizes in one of our racks, so I'll try it when I get back in to see if I can help you figure out your issue. On Apr 12, 2016 8:49 AM, "Justin Marshall" <[email protected]> wrote:
> Tried that too… Still can’t ping it > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Reynolds > *Sent:* Tuesday, April 12, 2016 9:46 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] EdgePoint S16 > > > > Make sure it's got an untagged vlan assigned to it > > On Apr 12, 2016 8:43 AM, "Justin Marshall" <[email protected]> wrote: > > Hi, > > > > > > I have an Edgepoint S16, and have an IP address assigned directly on one > of the interfaces done through Routing->IP->Interface Configuration. > However, I am unable to reach that IP when directly connected to that > interface through a laptop. > > > > > > I can still reach the IP Address assigned under > System->Connectivity->IPv4. > > > > > > I need to be able to reach the interfaces directly through IP addresses > assigned only to those interfaces. What am I missing here? > > > > Tried excluding the port from the default VLAN just to see if that would > make a difference, but ultimately will not be able to do that once it’s > deployed anyways… > > > > Thanks >
