I have had lots of problems with Cisco auto.  I always lock it down.  

From: Ryan Mano 
Sent: Tuesday, May 24, 2016 2:01 PM
To: af@afmug.com 
Subject: Re: [AFMUG] crc errors

​cisco gear... i leave auto on ciscos



--------------------------------------------------------------------------------

From: Af <af-boun...@afmug.com> on behalf of Andreas Wiatowski 
<andr...@silowireless.com>
Sent: Tuesday, May 24, 2016 2:07 PM
To: af@afmug.com
Subject: Re: [AFMUG] crc errors 

What type of switches/routers do you use? Mikrotiks…can be very problematic.



Cheers,

______________________________

Andreas Wiatowski | CEO

Silo Wireless Inc.

Email  andr...@silowireless.com

19 Sage Court

Brantford, Ontario N3R 7T4 (CANADA)

Tel +1.519.449.5656  Extension-600|Fax +1.519.449.5536 |Toll Free 
+1.866.727.4138



From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano
Sent: Tuesday, May 24, 2016 2:01 PM
To: af@afmug.com
Subject: Re: [AFMUG] crc errors



brand new...i replaced the old moto ones (beige​ ones) 


--------------------------------------------------------------------------------

From: Af <af-boun...@afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com>
Sent: Tuesday, May 24, 2016 1:53 PM
To: af@afmug.com
Subject: Re: [AFMUG] crc errors 



CRC errors are frequently a surge suppressor issue.  Sometimes they get wounded 
and cause errors.  



From: Ryan Mano 

Sent: Tuesday, May 24, 2016 11:24 AM

To: af@afmug.com 

Subject: Re: [AFMUG] crc errors



​i am using chucks surges and no there is no FM radio on them


--------------------------------------------------------------------------------

From: Af <af-boun...@afmug.com> on behalf of Sean Heskett <af...@zirkel.us>
Sent: Tuesday, May 24, 2016 1:00 PM
To: af@afmug.com
Subject: Re: [AFMUG] crc errors 



do the towers have and FM radio stations on them? 



-sean





On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote:

  most of my battles are at the tower...checking surges checking cables...all 
check out and I still end up replacing it



  also I notice an increase in Ethernet Link Detected and Ethernet Link Lost  
under stats in cambium radios either being APs ot BHs




------------------------------------------------------------------------------

  From: Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com>
  Sent: Tuesday, May 24, 2016 11:51 AM
  To: af@afmug.com
  Subject: Re: [AFMUG] crc errors 



  If this is customer end, we get surge suppressors partly blown by lightning 
causing CRC errors.  Next most common is critters partly chewing through cable.





  From: Justin Wilson 

  Sent: Tuesday, May 24, 2016 10:46 AM

  To: af@afmug.com 

  Subject: Re: [AFMUG] crc errors



  A lot of what I have seen is probably just from personal experience, which 
makes it not too scientific.  For example, We typically hardest the UBNT radios 
and left the Mikrotiks to auto.  Things seemed happier this way. The Gigabit 
specification says it should be auto everything. Sometimes this can have issues 
between vendors. 







  Justin Wilson

  j...@mtin.net



  ---
  http://www.mtin.net Owner/CEO

  xISP Solutions- Consulting – Data Centers - Bandwidth

  http://www.midwest-ix.com  COO/Chairman

  Internet Exchange - Peering - Distributed Fabric



    On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote:





    Want to hear how you guys go about handling crc errors on your radios?



    Like check duplex or check cables etc.



    Noticing in the past month or so am seeing an increase in crc errors….when 
I do….I change the duplex from 100 to 10base and it runs with no errors but the 
customer are not happy…sometimes I just can’t put it into 100base crc just go 
nuts



    Lets here your battles with crc’s




Reply via email to