In this case (for a 450i radio), the forum post is here: http://community.cambiumnetworks.com/t5/PMP-FAQ/How-to-Enter-Default-Mode-or-Recovery-Console-for-450i-series/m-p/52971
Matt From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Tuesday, May 31, 2016 10:03 AM To: af@afmug.com Subject: Re: [AFMUG] 450 APs Unless you have a 450i in which case I think you briefly turn off the power. From: Bill Prince<mailto:part15...@gmail.com> Sent: Tuesday, May 31, 2016 9:32 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] 450 APs Resetting to Factory Defaults (2 options) 1. On the radio GUI, navigate to Configuration, Unit Settings and select Set to Factory Defaults OR 2. On the radio GUI, navigate to Configuration, Unit Settings and enable and save option Set to Factory Defaults Upon Default Plug Detection. When the unit is powered on with a default/override plug (see section �Acquiring the Override Plug� in the PMP 450 Configuration and User Guide) the radio will be returned to its factory default settings. bp <part15sbs{at}gmail{dot}com> On 5/31/2016 7:30 AM, Dennis Burgess wrote: Without going to cambium and waiting to download and filling out a bunch of forms, what is the quick and dirty way to reset a 450 AP back to factory? � [DennisBurgessSignature] www.linktechs.net<http://www.linktechs.net/> � 314-735-0270 x103 � dmburg...@linktechs.net<mailto:dmburg...@linktechs.net> �