Corrupt storage Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 1, 2016 11:10 AM, "Nate Burke" <n...@blastcomm.com> wrote:
> I had an EPMP AP, 1 out of 4 on a tower, go AWOL Yesterday. Upon closer > inspection, it had reset to default configuration, and had gotten a DHCP IP > Address. Numerous powercycles did not change anything. Main and backup > firmware images are 2.6.1. > > This is where the weirdness is.... > > I have a default configuration file that I load on all AP's, going into > the field, it sets a generic SSID, and unit name, as well as security and > QOS settings. I loaded this file onto the defaulted radio, and rebooted > it. After the reboot, it had magically recovered all its original RF > settings, SSID/Frequency/sector Reuse, but all other unit settings, IP > Address/name/snmp were from my default file. > > I can understand losing the config due to some memory issue (not that it > should have happened), but not magically restoring half of it when > different info is in the restore file. >
