Is this a Ubiquiti POE or third party? I have seen these exact symptoms (on totally different equipment) in cases where the power supply couldn’t start up under load and would go into current foldback. But it would work if you unplugged the DC side, then plugged in the AC side and let it start up, then plugged in the DC side.
Even if it’s a Ubiquiti POE, you might try swapping out the POE, you might just have a bad or weak one. From: Chris Wright Sent: Wednesday, July 20, 2016 11:24 AM To: [email protected] Subject: Re: [AFMUG] AF24 requires power cycle at radio after power failure. If reseating the RJ connector fixes the issue when a PoE power cycle does not, I’d be inclined to think you have a bad crimp or poor contact between the AF and Ethernet. Chris Wright Network Administrator Velociter Wireless 209-838-1221 x115 From: Af [mailto:[email protected]] On Behalf Of Carl Peterson Sent: Wednesday, July 20, 2016 6:33 AM To: [email protected] Subject: [AFMUG] AF24 requires power cycle at radio after power failure. We have an AF24 that has twice failed to come back up after a power failure. Both times, a power cycle from the POE injector did not resolve the issue but unplugging the RJ at the radio did. Has anyone ever seen anything like this? Thoughts? Other then this, it seems to be working fine.
