Check FCC rules... First responders and public safety first priority and other agencies follow.
On Jul 25, 2016 3:53 PM, "SmarterBroadband" <[email protected]> wrote: > Good to know, I will take a look. > > Is a county office OK to use 4.9? > > Adam > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Jaime Fink > *Sent:* Monday, July 25, 2016 2:23 PM > *To:* Jaime Solorza; [email protected] > *Subject:* Re: [AFMUG] 4.9 Ghz PTP - Can I... > > > > B5c in 4.9 GHz is Part 90 Subpart Y certified, should get you 200 Mbps+ > aggregate in it’s max allowable channel configuration in that band. Great > distance for it. > > > > Jaime Fink • Mimosa <http://www.mimosa.co> • CPO & Co-Founder > > > > On July 25, 2016 at 2:18:33 PM, Jaime Solorza ([email protected]) > wrote: > > Our county folks have Cisco 4.9Ghz radios but are replacing with 3.65 GHz > due to hundreds of Radwins used across border by state and federal > agencies. I know Airaya had some 4.9GHz ptp solutions.... I know in 5GHz > once they go up they stay up pretty solidly. > > > > On Jul 25, 2016 2:57 PM, "SmarterBroadband" <[email protected]> > wrote: > > We currently provide 100 meg to our local county offices on an AF24. > > > > They want us to move the link to another location will be a 4.3 mile link, > so AF24 is out. > > > > I need a link to do 100 meg now and be able to do 200 when requested, I > want five nines, so Licensed. > > > > Can I use 4.9 Ghz for this? > > > > What is available for PTP in 4.9Ghz? > > > > If not, I could use a B11, but I hate to waste 11 Ghz spectrum on a short > link. > > > > Suggestions in Licensed 18Ghz? > > > > BTW they are price sensitive. > > > > Thanks > > > > Adam > > > > > >
