Not that I'm aware of. It's more for enterprisey things, but it does monitor Ubiquiti and Mikrotik :P
On Jul 28, 2016 2:02 PM, "Adam Moffett" <[email protected]> wrote: > Can you add MIB's to it? > > Like can I load in the Canopy MIB and have it track data points on Canopy > stuff? > > I'm thinking not, but if it did I'd be all over it. > > > > ------ Original Message ------ > From: "Joe Novak" <[email protected]> > To: [email protected] > Sent: 7/28/2016 12:34:15 PM > Subject: Re: [AFMUG] LibreNMS > > > the difference between other NMS and observium/librenms was to build a > platform that was plug and play as possible by just adding the device and > polling every data point available, in a way that remained consistent. > > per https://en.wikipedia.org/wiki/Observium > > "Observium has a number of simple core design goals driving its > development: minimum interaction, maximum automation and maximum > accessibility of information. These design goals have resulted in a > slightly unconventional monitoring system with almost no individually > customisable settings per device, and where almost everything that can be > monitored is automatically discovered." > > Your welcome to add devices/OIDs to this by patching the Observium code. I > assume librenms would accept it too. > > On Thu, Jul 28, 2016 at 11:06 AM, Bill Prince <[email protected]> wrote: > >> You left out the humble part. >> >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> >> On 7/28/2016 8:59 AM, Josh Baird wrote: >> >> Of course, that is why I lead with 'In my opinion.' >> >> On Thu, Jul 28, 2016 at 11:54 AM, Josh Reynolds <[email protected]> >> wrote: >> >>> That's just like, you know... Your opinion, man. >>> >>> >> >
