oh! I hadn't seen that they have them with N connectors now... I was actually thinking about this the other day... if we were to put up 8 (or even 12) horns instead of 4 90 degree sectors, we'd be able to get away with using ePMP LiteAP's on most, if not all of our sites. I'm thinking that the cost wouldn't be significantly more than using full APs with 90 degree sectors, and it should be way better in just about every way.
On Tue, Aug 16, 2016 at 8:52 AM, Mike Hammett <[email protected]> wrote: > Get more of them? :-) > > > I saw someone in NZ (I actually think he's on this list to) had replaced > their UBNT 120* sector with 4x 30* horns and everything was better after. > > > > 41 dB F/B sure is nice on a "sector". :-) > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > *From: *"Stefan Englhardt" <[email protected]> > *To: *[email protected] > *Sent: *Tuesday, August 16, 2016 8:42:58 AM > > *Subject: *Re: [AFMUG] ePMP 2000 and RF Elements > > These Horns does not have a „sector pattern“. So they are useless for > normal towers where you want 360 degree coverage in the first place. But > they are great as additional sectors for segments where there are more > users. They have the best FB/Ratio you can get. > > > > *Von:* Af [mailto:[email protected]] *Im Auftrag von *Adam Moffett > *Gesendet:* Dienstag, 16. August 2016 15:31 > *An:* [email protected] > *Betreff:* Re: [AFMUG] ePMP 2000 and RF Elements > > > > I've never looked closely. Yeah I guess if you get the same pattern in > the elevation as you do in the azimuth then that would explain it. > > > > > > ------ Original Message ------ > > From: "Mike Hammett" <[email protected]> > > To: [email protected] > > Sent: 8/16/2016 9:25:33 AM > > Subject: Re: [AFMUG] ePMP 2000 and RF Elements > > > > Most sectors spew shit all over the place. It's also called a symmetric > sector for a reason. The V beamwidth matches the H beamwidth. > > Surely this isn't the first time you've seen these. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > > *From: *"Adam Moffett" <[email protected]> > *To: *[email protected], [email protected] > *Sent: *Tuesday, August 16, 2016 8:21:00 AM > *Subject: *Re: [AFMUG] ePMP 2000 and RF Elements > > I'm not sure if that all jives. The energy has to go somewhere...if it's > not coming out the front it ought to be coming out the sides or rear. I.E. > if it's not emitting outside the intended area, wouldn't the gain by higher > rather than lower? > > > > > > ------ Original Message ------ > > From: "Mike Hammett" <[email protected]> > > To: [email protected] > > Sent: 8/16/2016 9:11:19 AM > > Subject: Re: [AFMUG] ePMP 2000 and RF Elements > > > > "Could", but likely not. From what I've heard from RF Elements and those > that have deployed them, the gain numbers can't really be compared straight > with the antennas we're used to. For one, it's a consistent value across > the band and across the intended radiation pattern. There are no major > nulls where your 18 dB antenna is really only doing 10 anyway. It also has > almost no emissions outside of the intended area. That means you have a > significantly lower amount of noise heard from outside the intended area. > *May* not have as much signal, but the noise should be more than the > difference less. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > > *From: *"Matt" <[email protected]> > *To: *[email protected] > *Sent: *Tuesday, August 16, 2016 8:07:19 AM > *Subject: *Re: [AFMUG] ePMP 2000 and RF Elements > > > Any reason you couldn't use an RF Elements horn with an ePMP 2000 (and > it's smart antenna)? I assume not, but figured I'd ask. > > There 90 degree horn appears to only have 10 db gain which could be > limiting. > > > > > > >
