We just put lags through the plate and a small wrap of mastic, sucks down and seals withoum creating a dam
On Sep 14, 2016 10:42 AM, "Chuck McCown" <[email protected]> wrote: > Short piece of steel schedule 40 tubing beveled on one end makes a great > cookie cutter for bolt holes. > > *From:* Ken Hohhof <[email protected]> > *Sent:* Wednesday, September 14, 2016 9:24 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] Tar Tape Sealent > > Another name is “pitch pad”. But rather than buy little pads, I just use > butyl mastic tape, like 3M 2229 in 3 inch width, and cover the whole bottom > of the J-arm base. I also find it helps if you use some sort of tool to > cut out a hole where the lags go through, to prevent the lags from grabbing > onto the tape and trying to twist it into a knot. > > > *From:* Jaime Solorza <[email protected]> > *Sent:* Wednesday, September 14, 2016 10:17 AM > *To:* Animal Farm <[email protected]> > *Subject:* Re: [AFMUG] Tar Tape Sealent > > > Ronard sells it I believe > > On Sep 14, 2016 9:12 AM, "Matt" <[email protected]> wrote: > >> Looking for a source of tar tape. The type to put under j-arm mount >> to seal holes when putting on a shingled roof. >> >
