That would be wonderful. I need this feature sooner rather than later. I have a sector with 50 subs that reaches 100% utilized most nights because of the two subs that are at 1x. Of course these two subs use the most bandwidth. Unfortunately, they cannot be moved to another AP at this time.
On Mon, Sep 26, 2016 at 2:33 PM, George Skorup <geo...@cbcast.com> wrote: > Look at the AP's power tab on the sessions page. Do you see any SMs at > MIMO-A and/or less than 8X/6X modulation? That's the downlink rate to the > SMs. 4X is going to eat up some air time. 2X and 1X is obviously even > worse. MIMO-A is even more ungood. > > I know Aaron talked about adding support to penalize low mod SMs so they > will have less effect on air time utilization. I hope that's coming in > 14.3. Or maybe he said for 15.0. I don't remember. > > On 9/26/2016 2:07 PM, Chris Wright wrote: > > I have a couple 450 APs showing relatively low traffic (20mbps) but 100% > downlink frame utilization on a 20mhz channel. I�ve seen this AP do twice > as much traffic with less frame utilization in the past, so what would be > causing this? > > � > > VC Count: 48 > > � > > *Frame Configuration:* > > Downlink Data: 75% > > Contention Slots: 6 > > Broadcast Repeat Count: 2 > > *�* > > Chris Wright > > Network Administrator > > � > > >
