I guess MikroTik figured out how to hack their way into STP on the
Atheros switch controllers. Coming in 6.38, you set up your slave ports
like normal, then create a bridge w/ (R)STP and add the master switch
interface as the only bridge port. We'll see if it works.
On 10/25/2016 11:10 AM, Josh Luthman wrote:
I just learned the other day thanks to Steve the Mikrotik software
bridges are (R?) STP by default.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Oct 25, 2016 at 12:07 PM, Bill Prince <[email protected]
<mailto:[email protected]>> wrote:
Actually Netonix (one t, no r). I don't know that I would leave it
on, but I don't know how you're using it.
https://www.netonix.com/wisp-switch.html
<https://www.netonix.com/wisp-switch.html>
bp
<part15sbs{at}gmail{dot}com>
On 10/25/2016 9:04 AM, Josh Reynolds wrote:
Nettonix.
You could always leave it on... If your access network is layer2
up to that switch, it could help.
On Oct 25, 2016 11:03 AM, "CBB - Jay Fuller"
<[email protected] <mailto:[email protected]>> wrote:
just discovered on one of our nettronix switches spanning
tree protocol was enabled.
we've run this switch probably four months - no real side
effects - but i don't run stp anywhere
else. any reason to leave this on?
thanks
