Does it support straight Telnet? Have you tried Net::SSH2?
On Mon, Nov 7, 2016 at 1:46 PM, Justin Marshall <just...@pdmnet.net> wrote: > Hi, > > > > I’m looking for the SNMP OID’s for POE config on the UBNT EdgePoint S16. > Specifically the ones that would let you disable/enable passive24v on a > specific port. > > > > I tried an snmpwalk, but without a MIB there’s a lot to dig through. > > > > I actually found a thread on UBNT’s forums that say you have to retrieve > them from the filesystem itself (https://community.ubnt.com/ > t5/EdgeMAX/SNMP-MIB-File/td-p/464763), but can’t figure out how to > actually get at the filesystem. SSH & Telnet both yield “(UBNT EdgeSwitch) > (Config)#” prompts with no real way to get underneath (unless it’s so > obvious I’m just somehow missing it) > > > > Can anyone point me in the right direction? > > > > If not… Has anyone had luck with Net::Telnet and the Edgepoint S16? I’ve > not been able to get a script to get past “configure” (nothing but > timeouts, even when matching the specific prompt) > > > > > > Thanks, > > Justin > > just...@pdmnet.net > > > > > > > > > > > > >