I think the real-world limit is about 12k PPS on the regular 450 AP.
From what I've seen anyway.
On 1/5/2017 6:34 PM, Craig Schmaderer wrote:
This is a link about .75 miles out. Yeah I have a old 450 tower that
i have been thinking about trying 30mhz on so that's interesting. I
was worried about that, isnt the 450 fpga like 1/3 the power of 450i.
Sounds like it might be just a bit to much to handle it. This tower
is not very loaded up so i cant show you much over 50mb throughput but
they run like at 50% frame utilization and i have not seen any latency
issues.
------------------------------------------------------------------------
*From:* Af <af-boun...@afmug.com> on behalf of Brian Sullivan
<installe...@foxvalley.net>
*Sent:* Thursday, January 5, 2017 5:42:35 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] 20mhz vs 30mhz PMP450
Can you share what your 30MHz AP's reach in terms of RF throughput
maximum?
You're using 450i correct?� In testing, our regular 450 in 30MHz
size seems to choke at capacity + ping times begin to spike.
On 1/5/2017 4:50 PM, Craig Schmaderer wrote:
I have a tower 4 90s 30mhz running back to back for months just
screaming. I saw a good performance jump a month ago when i went from
14.2.1 to 15.1.�
------------------------------------------------------------------------
*From:* Af <af-boun...@afmug.com> on behalf of Brian Sullivan
<installe...@foxvalley.net>
*Sent:* Thursday, January 5, 2017 3:47:12 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] 20mhz vs 30mhz PMP450
�
We are back to back 20 + 30 for about a week.� Seems OK.
On 1/5/2017 2:51 PM, Jon Langeler wrote:
> Anyone using 30mhz? Is it possible to sync 20 with 30?
>
> Jon Langeler
> Michwave Technologies, Inc.
>