Stop working out so much? ;-)
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "George Skorup" <geo...@cbcast.com> To: af@afmug.com Sent: Thursday, January 12, 2017 7:38:56 PM Subject: Re: [AFMUG] New project Yeah, just one extra clamp half, longer all-thread for the top mount and extra nuts and washers is pretty much all I meant. I think that will work fine for a sloped leg. You may want to also consider another version. We have several sites with large legs. I usually have to order the Valmont clamp halves that are 7" hole to hole center. And a couple sites off the top of my head are even bigger legs. On 1/12/2017 7:24 PM, Chuck McCown wrote: Howzat? From: Chuck McCown Sent: Thursday, January 12, 2017 6:13 PM To: af@afmug.com Subject: Re: [AFMUG] New project Dang it... From: Mathew Howard Sent: Thursday, January 12, 2017 5:23 PM To: af Subject: Re: [AFMUG] New project It's upside down... On Thu, Jan 12, 2017 at 6:15 PM, George Skorup < geo...@cbcast.com > wrote: <blockquote> Looks fine from my rockin chair. On 1/12/2017 5:23 PM, Chuck McCown wrote: <blockquote> Like this? From: George Skorup Sent: Friday, January 06, 2017 6:00 PM To: af@afmug.com Subject: Re: [AFMUG] New project Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: <blockquote> Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD </blockquote> </blockquote> </blockquote>