Joining aluminum to copper? Yeah, I would use something to prevent
galvanic action. Especially if there is moisture around (even just high
humidity).
We have some outdoor connections between copper & aluminum that have
been in service for about 18 years.
bp
<part15sbs{at}gmail{dot}com>
On 1/14/2017 11:16 AM, [email protected] wrote:
I had to join three square aluminum wires that are about an 1/8th of
an inch square.
I used a split bolt that is designed for aluminum. It deformed the
wires a bit.
Do need Noalox in there too or am I safe to just close it up?
-----Original Message----- From: [email protected]
Sent: Saturday, January 14, 2017 12:12 PM
To: [email protected]
Subject: Re: [AFMUG] OT In search of 400/201 volts
Make that in search of 400/230 volts. I got 400.8/231...
https://www.youtube.com/watch?v=iX3kxAA2L4Q
-----Original Message----- From: [email protected]
Sent: Saturday, January 14, 2017 12:09 PM
To: [email protected]
Subject: [AFMUG] OT In search of 400/201 volts
It lives!!!!!
Successful transgender surgery of a 30 kva transformer.
Turned a delta-delta into a wye-wye.
And she is even a pretty wye-wye.
