OK, multiply my previous answer by the cosine of the angular difference.
From: Mathew Howard
Sent: Friday, January 27, 2017 10:16 AM
To: af
Subject: Re: [AFMUG] 11ghz vertical separation
ha... they're roughly 45 degrees off, I bet I could get it down to about half
of the dish diameter! :P
On Fri, Jan 27, 2017 at 11:07 AM, Adam Moffett <dmmoff...@gmail.com> wrote:
Ah, but not if they're on different azimuths. Vertical separation could
approach zero then.
------ Original Message ------
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 1/27/2017 12:04:16 PM
Subject: Re: [AFMUG] 11ghz vertical separation
Dish centerline to dish centerline has to be at least one dish diameter
apart.... (ducking)
From: Mathew Howard
Sent: Friday, January 27, 2017 8:53 AM
To: af
Subject: [AFMUG] 11ghz vertical separation
I'm planning on adding an 11ghz link to a tower that we already have one
11ghz link on (existing link is B11, current plan is to add an AF-11FX), how
much vertical separation am I going to want to have between the two dishes?
