Netgear came out with higher end POE version On Feb 2, 2017 9:41 AM, "Ken Hohhof" <[email protected]> wrote:
> Or both? > > Haha, "I alone control the room". > > And what about "rouge" devices? I'm not sure what they are, but > apparently they are common these days. Maybe because you can't say "off > the reservation" anymore. > > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Adam Moffett > Sent: Thursday, February 2, 2017 10:26 AM > To: [email protected] > Subject: Re: [AFMUG] POE-IN Powered Switch that will do 48 and 24V > > What about when you're dead or get a new job? > > > ------ Original Message ------ > From: "Nate Burke" <[email protected]> > To: [email protected] > Sent: 2/2/2017 11:19:50 AM > Subject: Re: [AFMUG] POE-IN Powered Switch that will do 48 and 24V > > >OK, so it's not that there is no power in there, it's that there is no > >UPS power in there, and the Office has a UPS that can feed it. And it's > >not a closet, but more of a room. And I can Guarantee that rogue > >devices will not be plugged into it (I alone control the room). > > > > > > > >On 2/2/2017 9:58 AM, Adam Moffett wrote: > >>10 devices at 15.4W (802.3af standard) would be 154W. Unless the cable > >>is very short, you'll suffer severe voltage drop. Something bad would > >>happen....something bad like stuff not turning on or blowing an > >>internal fuse in the power supply. Not catastrophe, just bad. > >> > >>I'm sure your individual devices are lower consumption than that, but > >>you can't assume someone won't plug in something higher power at a > >>later date. > >> > >>IMO run two cables to two smaller switches, or get an outlet in there. > >> > >> > >> > >> > >>------ Original Message ------ > >>From: "Nate Burke" <[email protected]> > >>To: [email protected] > >>Sent: 2/2/2017 10:38:59 AM > >>Subject: Re: [AFMUG] POE-IN Powered Switch that will do 48 and 24V > >> > >>>Anything with More Ports? I'm looking at 2-3 phones, and 5-6 > >>>cameras. Still very low power draw overall. > >>> > >>>On 2/2/2017 9:31 AM, Jim Bouse [Brazos WiFi] wrote: > >>>>http://www.ispsupplies.com/Netonix-WS-6-MINI > >>>> > >>>>POE in on port 1. 24 or 48 out on 2-6. > >>>> > >>>>Jim Bouse > >>>>Owner > >>>>Mobile IT Pro - Brazos WiFi > >>>>979-985-5912 > >>>>[email protected] > >>>> > >>>>-----Original Message----- > >>>>From: Af [mailto:[email protected]] On Behalf Of Nate Burke > >>>>Sent: Thursday, February 02, 2017 9:28 AM > >>>>To: Animal Farm <[email protected]> > >>>>Subject: [AFMUG] POE-IN Powered Switch that will do 48 and 24V > >>>> > >>>>Is there another POE-IN powered switch, ALA Edgepoint S16, that can > >>>>do both 48 and 24V output? I have a remote wiring closet with no > >>>>power, but want to put a switch there to power a couple VoIP Phones > >>>>and ubnt cameras. I'd like to power the switch and subsequent POE > >>>>devices via 1 or 2 cat5 feeds from one of the offices. The S16 will > >>>>work perfect, but wondering if there is something else that might be > >>>>a little cheaper. I looked through the netonix page, and saw DC > >>>>powered switches, but not one's that took the POE straight in one of > >>>>the ports. > >>> > > > > > >
