I was never able to produce a particular color, but I just wanted a quick visible indication of where a repeater would work.
From: That One Guy /sarcasm Sent: Friday, February 3, 2017 8:45 AM To: [email protected] Subject: Re: [AFMUG] exporting radio mobile propagation to google earth im doing -70 to -50 off each of the two end points trying to get to where good overlaps produce a certain color, but messing with the pallete isnt working as expected im not sure how to edit the antenna patterns, Id prefer to just do an arc rather than a full omni, there isnt any real gain in this other than it being pretty in the event we find a structure that wont allow a single midpoint we will just overlay that pattern to find a second location i would prefer to just dray the 5-10 mile band, but i dont know if that can be configured the way i want it to, that once again is just for pretty the long term goal is to build out in 5-8 mile increments to be able to stay lower power and cheaper antennas if we license the hops On Fri, Feb 3, 2017 at 9:35 AM, <[email protected]> wrote: I do two coverage maps on the same picture. I use rainbow (heat map) and dbm and set it to range from –50 to –90. Do one coverage map from one location. Then when it is painting the second map, possible repeater locations show up as dark or black squares. From: That One Guy /sarcasm Sent: Friday, February 3, 2017 8:22 AM To: [email protected] Subject: Re: [AFMUG] exporting radio mobile propagation to google earth coverage, to identify areas where typical structures would be beneficial for mid point repeater sites. In this particular project 75 foot grain legs. So we only send out drivers to an area that that would be. I dont recall if clutter maps are at all accurate, and havent been able to get that data to show up in the propagation or if thats just limited to ptp On Fri, Feb 3, 2017 at 7:36 AM, Mike Hammett <[email protected]> wrote: Are you asking about PtP or a coverage map? ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ---------------------------------------------------------------------------- From: "That One Guy /sarcasm" <[email protected]> To: [email protected] Sent: Thursday, February 2, 2017 4:16:07 PM Subject: [AFMUG] exporting radio mobile propagation to google earth i used to do this all the time, now i cant remember how. Im plotting for midpoint scouting. I need to put it on a kml for the guy to go to the target areas marking structures. being able to interact in google earth is a requirement and there are other specifics if i recall correctly there was an google earth update that was going to break the kmz overlay option, but that was a long time ago -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
