I think 1024 qam is around 10 bits/hz so 40 MHz should be nearly 400 mbps. 2048qam is probably 12 bits/hz?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Feb 15, 2017 at 9:49 AM, Jeff Broadwick - Lists <jeffl...@att.net> wrote: > I'd have to run the numbers, but it would get you a lot closer than a > 40MHz channel. > > Jeff Broadwick > ConVergence Technologies, Inc. > 312-205-2519 <(312)%20205-2519> Office > 574-220-7826 <(574)%20220-7826> Cell > jbroadw...@converge-tech.com > > On Feb 15, 2017, at 8:46 AM, Faisal Imtiaz <fai...@snappytelecom.net> > wrote: > > How would you do 500meg on a single 60MHZ channel in 6ghz ? > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 <(305)%20663-5518> > > Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: > supp...@snappytelecom.net > > ------------------------------ > > *From: *"Jeff Broadwick - Lists" <jeffl...@att.net> > *To: *af@afmug.com > *Sent: *Wednesday, February 15, 2017 7:05:30 AM > *Subject: *Re: [AFMUG] 18GHz licensed > > Did you check and see if there is a 60MHz channel available in 6GHz Rory? > > Jeff Broadwick > ConVergence Technologies, Inc. > 312-205-2519 <(312)%20205-2519> Office > 574-220-7826 <(574)%20220-7826> Cell > jbroadw...@converge-tech.com > > On Feb 15, 2017, at 1:39 AM, Rory Conaway <r...@triadwireless.net> wrote: > > Will the Cambium 820 support that? > > Rory > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] On Behalf > Of George Skorup > Sent: Tuesday, February 14, 2017 11:25 PM > To: af@afmug.com > Subject: Re: [AFMUG] 18GHz licensed > > IIRC, there are 10 channel pairs on the 40MHz channel plan for 18GHz. > You could always do 2+0 if there are two channels available on your > proposed path. > > On 2/15/2017 12:06 AM, Rory Conaway wrote: > > 12 miles. Needs 4' dishes minimum but I didn't ask about both > polarities. Thanks. > > > Rory > > > -----Original Message----- > > From: Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] On Behalf > Of Trey Scarborough > > Sent: Tuesday, February 14, 2017 10:05 PM > > To: af@afmug.com > > Subject: Re: [AFMUG] 18GHz licensed > > > Hmm Xpic if you can get 40mhz on H and V. are you trying to make this > > go > > 30 miles though... > > > > On 2/14/2017 10:17 PM, Rory Conaway wrote: > > I have a link where only 40MHz is available. What would my best > > option be to get more than 500Mbps out of it? 2048QAM is limited to > 347Mbps. > > > > > *Rory Conaway **� Triad Wireless �**CEO* > > > *4226 S. 37^th Street � Phoenix � AZ 85040* > > > *602-426-0542 <(602)%20426-0542>* > > > *r...@triadwireless.net <mailto:r...@triadwireless.net > <r...@triadwireless.net>>* > > > *www.triadwireless.net <http://www.triadwireless.net/>* > > > * * > > > �The successful man is the one who finds out what is the matter > > with his business before his competitors do.� - Roy L. Smith > > > > > > >