I'll ultimately need to have bgp I and e if there is a difference, ospf, and whatever for mpls functional. I love these mikrotiks for cost and featurset with a good user base for reaching out to, but I tell you, the ubiquiti level of firmware mishaps is frustrating. I should have just done CC$$ courses and gone with used Cisco's on the interior and two new on the edge
On Feb 17, 2017 6:39 PM, "Mathew Howard" <mhoward...@gmail.com> wrote: > I've been slowly upgrading things to 6.36.4, and it seems fine, but we've > still got a lot on 6.35.4 too. I haven't done anything to speak of with > anything newer yet. > > On Fri, Feb 17, 2017 at 1:43 PM, That One Guy /sarcasm < > thatoneguyst...@gmail.com> wrote: > >> we run rb100AHx2 across the network, not alot to the configs, straight >> routing, OSPF a couple bridges and a DHCP relay >> >> we have been on 6.35.4 with no issues for a while >> >> Checking current releases, we are a bit behind. but i see 6.36 gives me >> fqdn for firewall acl, I need this for my remote access, right now I have >> to RDP to the office to get on our routers remotely because of the ACL and >> my home being dynamic. >> >> Is 6.36 or above considered stable or recommended? >> >> -- >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> > >