OK, so if you put + on the left pin and – on the right pin, then jumpers for
1/2 and 4/5 need to be on the left and center pins and the jumpers for 3/6 and
7/8 need to be center and right pins.
From: Dan Petermann
Sent: Thursday, March 02, 2017 11:53 AM
To: af@afmug.com
Subject: Re: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT
POE-POWERINSERTER/SURGE PROTECTOR
Sorry, here is the pinouts with polarity
Pin 1 +
Pin 2 +
Pin 3 -
Pin 4 +
Pin 5 +
Pin 6 -
Pin 7 -
Pin 8 -
On Mar 2, 2017, at 11:34 AM, Chuck McCown <ch...@wbmfg.com> wrote:
On all 8 pins? If so, then you slide all the jumpers one way and only hook
up +48 to the POE inserter. Is the –48 via chassis ground?
From: Dan Petermann
Sent: Thursday, March 02, 2017 11:30 AM
To: af@afmug.com
Subject: Re: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT POE
-POWERINSERTER/SURGE PROTECTOR
Excellent! The polarity is +48vdc.
On Mar 2, 2017, at 11:00 AM, Chuck McCown <ch...@wbmfg.com> wrote:
I would say yes, but that document does not indicate the DC power polarity
of the pairs. So yes, provided the jumpers on the POE are set right.
Can anyone in Exalt tech support give you the polarity info?
From: Dan Petermann
Sent: Thursday, March 02, 2017 10:55 AM
To: af@afmug.com
Subject: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT POE -
POWERINSERTER/SURGE PROTECTOR
Chuck,
do you know if the 800-GIGE-POE-APC will work to power up a Exalt
ExtremeAir radio?
We are being told that the DC power supplies won’t be available until June.
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Chuck,
do you know if the 800-GIGE-POE-APC will work to power up a Exalt
ExtremeAir radio?
We are being told that the DC power supplies won’t be available until June.
