There a couple on Amazon that use 5.8 autoswitching, could work here. I found a 60ghz one for $ 150 there, and I ordered it. We’ll see
Paul From: Af [mailto:[email protected]] On Behalf Of Jaime Solorza Sent: Tuesday, March 28, 2017 2:37 PM To: Animal Farm <[email protected]> Subject: Re: [AFMUG] Wireless HDMI There is one that works on 60Ghz On Mar 28, 2017 12:29 PM, <[email protected]<mailto:[email protected]>> wrote: I think we could all use this. I use an HDMI-over-two-CAT5 device to pipe it around my house. From: Josh Reynolds Sent: Tuesday, March 28, 2017 12:26 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Wireless HDMI No ability to tape one end of the old cable to the new one and pull it through? On Mar 28, 2017 1:18 PM, "Paul McCall" <[email protected]<mailto:[email protected]>> wrote: Anybody have a wireless HDMI transmitter receiver that they are in love with? We have a ceiling mount projector that we replaced recently with an Optomo. The old projector that got replaced worked with the HDMI that we ran 10 years ago when we built the room, but the new one won’t. I tried a couple of the “boosters” and they don’t work for me. We ran a long New cable with better specs and it works just fine. It’s a HUGE undertaking to remove the floor of the unit above us to get to a place where we could replace the existing one, so looking for wireless. It would be LOS to my desktop PC at about 20 feet away (at the most). Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800<tel:(772)%20564-6800> [email protected]<mailto:[email protected]> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>
