Awesome!  Thanks!

On Sat, Apr 22, 2017 at 11:13 PM, Adam Moffett <[email protected]> wrote:

> By the way, my reasoning on the big washers + rod is you can use a couple
> of big fat wrenches to really lay the torque on them things.
>
> I have not tried to do this with a log, but I have repaired a square beam
> this way.  I pulled the split all the way back together with a few
> strategically placed rods and big washers.
>
> ------ Original Message ------
> From: "Adam Moffett" <[email protected]>
> To: [email protected]
> Sent: 4/23/2017 1:03:56 AM
> Subject: Re: [AFMUG] Pole banding
>
> Something like this?
> http://www.linemen-tools.com/ALUM_BAB_5848_Single_band_48_
> Buckle_1_1_4_p/alu-bab-5848.htm
> Those guys ship pretty quick.
>
> Just an idea, but on the same site look under "washers" for "curved square
> washers".  You can get 4" x 4" washers curved for poles.  Run a threaded
> rod or long bolt through the pole with a couple of those washers on each
> side.
>
>
> ------ Original Message ------
> From: "Jeremy" <[email protected]>
> To: [email protected]
> Sent: 4/22/2017 10:44:13 PM
> Subject: [AFMUG] Pole banding
>
> I have a need to band some logs that are splitting, in order to slow or
> stop the process.  I have found that a lot of the power pole and utility
> companies sell products that should work, for attaching to poles.  I am
> having a hell of a time finding anywhere to actually purchase said products
> though.  Hubbell lists Codale as their local distributor, but they only
> deal with the lighting division, not Hubbell Power Systems.  They are
> having trouble reaching anyone at HPS.  Anyone have any idea where I can
> find pole banding products? such as this one:
>
> http://www.hubbellpowersystems.com/pole-line/misc/banding-pole-
> attachments/
>
>
>
>

Reply via email to