Yeah, I tried pretty much all of the 2.4ghz models, and none of them worked... but I'm pretty sure none of the 2.4ghz stuff has gigabit ethernet. I didn't have an NSM5 handy, but I suspect if any of Nanostations work it would only be the newer XW based ones. I'm not sure if any of the nanostations have gigabit ports, but I know the old ones don't.
On Tue, May 2, 2017 at 1:46 PM, Jeremy <jeremysmi...@gmail.com> wrote: > Yeah, I guess all of our swaps must have been Powerbeams. I swear I > tested it with a Nanostation, but perhaps I am mistaken. > > On Tue, May 2, 2017 at 12:34 PM, Josh Luthman <j...@imaginenetworksllc.com > > wrote: > >> Definitely doesn't work on NSM2 or Beam2-400 as of this morning. >> >> >> Josh Luthman >> Office: 937-552-2340 <(937)%20552-2340> >> Direct: 937-552-2343 <(937)%20552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, May 2, 2017 at 1:15 PM, Jeremy <jeremysmi...@gmail.com> wrote: >> >>> Yes you can. I have done it many many times. I don't know when they >>> added that capability, but it works on Nanostations, Nanobeams, Locos, and >>> Powerbeams. They power right up. >>> >>> On Tue, May 2, 2017 at 11:04 AM, Mathew Howard <mhoward...@gmail.com> >>> wrote: >>> >>>> Umm... no. You cannot run Ubiquiti gear backwards (at least not the >>>> older stuff, I haven't tried it on any of the AC radios). I don't think it >>>> will fry it, but it won't power it either... same for Canopy. ePMP on the >>>> other hand, will happily run on whatever pinout you feed it (with the >>>> exception of a couple of the older radios). I haven't tried anything other >>>> than the proper pinout out on any of the airfiber radios, but it wouldn't >>>> surprise me if they do auto-sensing... Canopy 450i APs will take any pinout >>>> you throw at them as well. >>>> >>>> On Tue, May 2, 2017 at 11:40 AM, Jeremy <jeremysmi...@gmail.com> wrote: >>>> >>>>> You can run Ubiquiti gear backwards. In other words, you can power >>>>> Ubiquiti with a Canopy POE without frying it. You cannot power a Canopy >>>>> with a UBNT POE though, without swapping the cables. It has always been >>>>> this way, so they must have the same auto-sensing power on the AF5X units >>>>> as well. >>>>> >>>>> On Mon, May 1, 2017 at 4:08 PM, Josh Luthman < >>>>> j...@imaginenetworksllc.com> wrote: >>>>> >>>>>> It was like the first shipment that couldn't do 48v. The rest can. >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 <(937)%20552-2340> >>>>>> Direct: 937-552-2343 <(937)%20552-2343> >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> On May 1, 2017 4:48 PM, "Mathew Howard" <mhoward...@gmail.com> wrote: >>>>>> >>>>>>> Nevermind... I see the pinout on the spec sheet. If you're using it, >>>>>>> I guess it works... but it's definitely not the same pinout as the stock >>>>>>> PoE. >>>>>>> >>>>>>> On Mon, May 1, 2017 at 3:41 PM, Mathew Howard <mhoward...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Yeah, it's basically just the really early ones that will only work >>>>>>>> on 24v. As far as the pinout goes, +1/2,4/5 & -7/8,3/6 is definitely >>>>>>>> the >>>>>>>> correct pinout... I've never tried another pinout, or heard of another >>>>>>>> pinout working but I wouldn't be terribly surprised if it does work. >>>>>>>> They'll certainly run on just +4/5 & -7/8. >>>>>>>> >>>>>>>> Are you sure about the pinout on that injector? I don't see any >>>>>>>> pinout listed on the spec sheet. >>>>>>>> >>>>>>>> On Mon, May 1, 2017 at 3:00 PM, Josh Baird <joshba...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Any new-ish AF5X can take 48VDC [1]. >>>>>>>>> >>>>>>>>> [1] https://community.ubnt.com/topic/188588/af-x-poe-voltage-ran >>>>>>>>> ge-s >>>>>>>>> >>>>>>>>> On Mon, May 1, 2017 at 3:52 PM, Carl Peterson < >>>>>>>>> cpeter...@portnetworks.com> wrote: >>>>>>>>> >>>>>>>>>> I remember reading somewhere that the newer AF5Xs could be >>>>>>>>>> powered by 48V as well as 24V but I can't seem to find that source >>>>>>>>>> anymore. I am also a little confused on the POE pinout. The Spec >>>>>>>>>> sheet >>>>>>>>>> says 1,2,4, 5 + and 3,6,7,8 - but we have Airfibers powered with >>>>>>>>>> TP-DCDC-4856G-VHP injectors that are 3,4,5,6 + and 1,2,7,8 - . What >>>>>>>>>> am I >>>>>>>>>> missing here? >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>> >>>> >>> >> >
