I would have assumed "i" meant industrial and "c" meant commercial.
------ Original Message ------
From: "Carlos Alcantar" <car...@race.com>
To: "af@afmug.com" <af@afmug.com>
Sent: 6/12/2017 5:41:26 PM
Subject: Re: [AFMUG] Temperature and SFPs
yes there is a difference there are i and c temp optics. The way I
always keep them straight in my head is c is for colo meaning indoor
rated.
Carlos Alcantar
Race Communications / Race Team Member
1325 Howard Ave. #604, Burlingame, CA. 94010
Phone: +1 415 376 3314 / car...@race.com / http://www.race.com
<http://www.race.com/>
--------------------------------------------------------------------------------
From: Af <af-boun...@afmug.com> on behalf of Adam Moffett
<dmmoff...@gmail.com>
Sent: Monday, June 12, 2017 1:15:30 PM
To:af@afmug.com
Subject: Re: [AFMUG] Temperature and SFPs
I was told by a Trango sales rep that they had seen packet loss at low
temperatures with some SFP's, and that was why I should buy the JDSU
model they recommend.
I took their word for it and bought the JDSU.
------ Original Message ------
From: "Nate Burke" <n...@blastcomm.com>
To: "Animal Farm" <af@afmug.com>
Sent: 6/12/2017 11:23:24 AM
Subject: [AFMUG] Temperature and SFPs
>I was just looking around at 10g SFP's, I saw that the MaxxWave brand
>list 0c-70c as operating temperature, and the Mikrotik and UBNT
modules
>list no temperature range at all. Are SFP's really temperature
>dependent? I'm more worried about cold than heat. I had a couple
>edgepoints with 10g Maxxwave modules out over last winter without any
>issues, but it was rather mild.
