Thanks, that was what I was looking for. Need to assign a sub a static DHCP address and a second DHCP address at the same time. Essentially running two circuits to the BNG over one SM.
> On Jun 14, 2017, at 9:41 PM, David Milholen <dmilho...@wletc.com> wrote: > > I believe this is correct but vlan 502 will end up on the ethernet of the SM. > essentially having the Sub on vlan501 and 502 will be looking for an > interface on the other end of the sub matching it. > > If you plug a pc into the sub direct all it will see is 501. If a switch is > plugged in with a vlan tag of 502 it will connect vlan 502 all others will > pass over 501. > > hope that helps > > I do this with a few subs. > > > >> On 6/14/2017 2:21 PM, Carl Peterson wrote: >> If I have a SM set for QinQ with the SVLAN set, will it put any VLANS that >> ingress the SM inside the S VLAN or only the default port VID and any >> MAC->VLANS that are set on it? i.e if I have the default port VID set to >> 501, and the S VLAN set to 600, it puts 501 inside S VLAN 600 but if a >> tagged packet ingresses, 502 for example, will it also be put inside S VLAN >> 600? I don't have a CSM/AP set up in my lab right now and I'm working on a >> config. >> >> > > -- > <Davidmvcf.jpg>
