Yeah, that's true... the 110PTP can do 48v. On Wed, Jun 28, 2017 at 3:20 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote:
> That and power. The 110ptp does 24-48 and I think 200 is 24 only. Both > do both polarities > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jun 28, 2017 4:01 PM, "Mathew Howard" <mhoward...@gmail.com> wrote: > >> The normal Force 110 is probably discontinued, but as far as I know the >> Force 110 PTP is still being made. >> >> The only reason that I'd use a Force 110 PTP instead of a Force 200 would >> be if I needed to use GPS sync... other than that, the Force 200 is going >> to be better in pretty much every way. >> >> On Wed, Jun 28, 2017 at 2:22 PM, Steve Jones <thatoneguyst...@gmail.com> >> wrote: >> >>> force 180 is the integrated little guy force 200 is the dished one, 110 >>> I believe is DC. I use the 200 all the time for ptp, I love them, even >>> though they add the latency >>> >>> On Wed, Jun 28, 2017 at 2:07 PM, Lewis Bergman <lewis.berg...@gmail.com> >>> wrote: >>> >>>> I am looking for an inexpensive very low bandwidth replacement for a >>>> PTP400. I need less than a meg so throughput isn't an issue. I see they are >>>> both 5,10,20, and 40 MHz channel widths which is good. I can set it on 5MHz >>>> and get more than what I need and hopefully stay out of everyone else's >>>> way. >>>> >>>> Unless I am looking at the wrong SKU it looks like the 110 is almost >>>> twice as much. Maybe I am not looking at complete kits or something? >>>> >>>> From those that have used them, what do you think? >>>> >>> >>> >>