I don't have one of the old sectors here to try it on, but I suspect that if Cambium could be convinced to sell the little plastic mount off the back of the new sectors (which is also exactly the same as the radio mount on the PMP450i 900mhz SM Yagis), a guy could drill some new holes in it and replace the mount on one of the old sectors with that.
The other option would be to just get some RPSMA male to female jumpers to extend the antenna cables and just use the pole mount that comes with the ePMP 2000 AP. On Wed, Jul 12, 2017 at 12:52 PM, Mathew Howard <[email protected]> wrote: > It's definitely not worth it everywhere (well, not worth it to me, > anyway). Ignoring the beamforming sector (which you could theoretically use > with the old sectors anyway), the new sectors do have a bit better specs, > but it's not going to be a huge difference in most cases. > > As far as I can see, there's really not any reason to use the beamforming > antenna in areas where the spectrum is reasonably clean and you don't have > uplink issues. > > On Wed, Jul 12, 2017 at 12:06 PM, Mike Hammett <[email protected]> wrote: > >> In some areas, sure, but I don't see needing it everywhere yet. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions <http://www.ics-il.com/> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> Midwest Internet Exchange <http://www.midwest-ix.com/> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> The Brothers WISP <http://www.thebrotherswisp.com/> >> <https://www.facebook.com/thebrotherswisp> >> >> >> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >> ------------------------------ >> *From: *"[email protected]" <[email protected]> >> *To: *[email protected] >> *Sent: *Wednesday, July 12, 2017 12:00:06 PM >> *Subject: *Re: [AFMUG] Epmp 2000 to Epmp1000 Sector Bracket? >> >> >> On towers I know it can be a pain, but it's worth upgrading to the new >> beamforming sectors. >> >> On Wed, Jul 12, 2017 at 12:46 PM, Mike Hammett <[email protected]> wrote: >> >>> I complained to Cambium, but they didn't care. They were going to try to >>> talk to RF Elements about an adapter. >>> >>> >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions <http://www.ics-il.com/> >>> <https://www.facebook.com/ICSIL> >>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>> <https://twitter.com/ICSIL> >>> Midwest Internet Exchange <http://www.midwest-ix.com/> >>> <https://www.facebook.com/mdwestix> >>> <https://www.linkedin.com/company/midwest-internet-exchange> >>> <https://twitter.com/mdwestix> >>> The Brothers WISP <http://www.thebrotherswisp.com/> >>> <https://www.facebook.com/thebrotherswisp> >>> >>> >>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >>> ------------------------------ >>> *From: *"Gino A. Villarini" <[email protected]> >>> *To: *[email protected] >>> *Sent: *Wednesday, July 12, 2017 11:02:55 AM >>> *Subject: *[AFMUG] Epmp 2000 to Epmp1000 Sector Bracket? >>> >>> >>> We are replacing Epmps 1000 Paps with 2000 and what to keep the existing >>> sector, anyone has an adaptor bracket? >>> >>> >>> >>> *Gino A. Villarini* >>> President >>> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 >>> >>> >>> >> >> >
