The UML one isn’t long enough. Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adair Winter Sent: Sunday, July 23, 2017 9:02 AM To: af@afmug.com Subject: Re: [AFMUG] Mimosa C5c The ds3000 is probably one of the worst mounts I've ever used. Super soft and easy to crush. Might be ok with a support arm. The UML that streakwave sells is much higher quality. On Jul 23, 2017 10:43 AM, "Rory Conaway" <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: The DS-3000 mount with at least 1 brace works well although 2 are recommended. There is another one called a striker which even stronger. Also look at the KPPerformance antennas. Kent Urweiller says they are better on noise than the LW antennas. Mine just came in so I haven’t tested it yet. Rory From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of David Coudron Sent: Sunday, July 23, 2017 8:35 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] Mimosa C5c We are just starting to install these. We are using the RocketDish 5G30. We have already learned a couple of things we didn’t expect: 1. When you unlock them, you need to select PTMP mode. There is a question during the unlock process that wasn’t highly apparent, and our installer missed it and selected PTP or it defaulted to PTP, not sure which yet. Spent a lot of time trying to figure out why it would only see PTP links. I am not sure the question even pops up in the mobile app, we need to look at that again as that is what the installer used to unlock it. We caught it after unlocking another one from the web browser on a laptop. 2. We also spent quite a bit of time with the cable connections as the connectors aren’t marked with polarity. After getting two opposite answers on the polarity of the connectors from Mimosa, the final answer was that connector 1=Horizontal, but it doesn’t matter as the unit autocorrects for polarity. This was late on Friday, we will be working with it again to confirm tomorrow. We have been unable to find any documentation on the RocketDish, but aren’t sure that using one connector on the dish versus another for Horizontal matters if the C5c is really autocorrecting. 3. You need a pretty tall and heavy duty J-Pole as the bracket on the back is pretty long between the two clamp points. Normal J-Poles, even the heavy ones we are using aren’t long enough. We are trying to find a better option for that. We expect we will only use these in limited areas as we have been having really good luck with the C5. Just installed a link at 3 miles and are getting RSSI of -68. David Coudron david.coud...@advantenon.com<mailto:david.coud...@advantenon.com> | Mobile: 612-991-7474<tel:(612)%20991-7474> Advantenon, Inc. [cid:image001.png@01CEE562.60FF8FC0] <http://www.linkedin.com/company/Advantenon> [cid:image002.png@01CEE562.60FF8FC0] <http://www.twitter.com/Advantenon> [cid:image003.png@01CEE562.60FF8FC0] <http://www.facebook.com/Advantenon> [cid:image004.png@01CEE562.60FF8FC0] <http://blog.advantenon.com/> i...@advantenon.com<mailto:i...@advantenon.com> | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN 55447 | www.advantenon.com<http://www.advantenon.com/> | Phone: 800-704-4720<tel:(800)%20704-4720> | Local: 612-454-1545<tel:(612)%20454-1545> [cid:image005.jpg@01D30398.F43A2540] From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jason McKemie Sent: Saturday, July 22, 2017 8:55 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] Mimosa C5c Anyone out there using these? With what antennas? Thanks. -Jason