55G I hope. Depends on what they will require for winds there and the size of
the dish (and the height of the trees...)
From: Josh Reynolds
Sent: Monday, August 14, 2017 12:44 PM
To: af@afmug.com
Subject: Re: [AFMUG] 100-500 Mbps
With tower? Sounds like you'll be cutting it close.
On Aug 14, 2017 1:41 PM, "Chuck McCown" <ch...@wbmfg.com> wrote:
Trying to bring in the whole system, with a 50’ tower at one end for under
$10K.
From: Josh Reynolds
Sent: Monday, August 14, 2017 12:31 PM
To: af@afmug.com
Subject: Re: [AFMUG] 100-500 Mbps
$3,000 roughly without licensing or coordination, using their 35dBi dishes.
That covers both radios and high and low duplexers.
On Aug 14, 2017 1:22 PM, "Adair Winter" <ada...@amarillowireless.net> wrote:
About $6 or 7k. 600mb
Nothing much is cheaper
On Aug 14, 2017 12:51 PM, "Chuck McCown" <ch...@wbmfg.com> wrote:
I need to extend backbone to a handful (9) of DSL remotes. Most of them
have perhaps 15 customers each. This is a micro-pop type of application.
So 100-250 Mbps is probably plenty of BW for now.
I was considering AF11 for this but there are several other radios out
there in a similar category.
Most of the distance average 5 miles. Hoping to use 2’ dishes for
everything. I think I will be doing 9 remote sites.
I think you can get one license and add locations and frequencies to it,
so hoping to save some money there.
What is an AF11 system selling for all in?
Any other suggestions for radio?
