is there anything connected to the timing port of these radios??

-sean


On Thu, Sep 7, 2017 at 10:17 AM, Darren Shea <[email protected]> wrote:

> Just wondering, if this is a problem which only bedevils me, or if other
> people are seeing it:
>
>
>
> PMP450 SMs, running 15.0 or later f/w (it’s a question right now whether
> the AP f/w is related to this, but it seems that the APs are usually
> running 13.2 f/w)
>
>
>
> The symptom is the SM throws a bunch of "Deleting a timer since it was
> active" errors, then some other errors, then it resets to factory defaults
> and reboots (see below for typical Event log snippet). Sometimes, the radio
> loses calibration data. Because we run our configurations as close as
> possible to default in the first place, we can typically access the radio
> via ICC and reconfigure it appropriately without a truck. However, and this
> is a *huge* deal, some of these radios that had 10M keys are now
> reverting to 4M keys! This is going to cause us major headaches.
>
>
>
> I have opened lines of communication with Cambium about this, but they are
> giving me their standard “we haven’t heard about this” response which is
> always their default up until they admit it’s a problem and start to
> resolve it.  Have any of you encountered these issues?
>
>
>
> Typical Event Log snippet:
>
> 09/07/2017 : 01:26:19 CST : :Deleting a timer since it was active (T),
> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>
> 09/07/2017 : 01:26:21 CST : :Deleting a timer since it was active (T),
> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>
> 09/07/2017 : 01:26:23 CST : :Deleting a timer since it was active (T),
> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>
> 09/07/2017 : 01:26:25 CST : :SNMP user; user=snmp; Reboot from SNMP;
>
> 09/07/2017 : 01:26:25 CST : :Deleting a timer since it was active (T),
> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>
> 09/07/2017 : 01:26:27 CST : :SNMP user; user=snmp; Reboot from SNMP;
>
> 09/07/2017 : 01:26:27 CST : :Forced reset;
>
> 09/07/2017 : 01:26:27 CST : :Deleting a timer since it was active (T),
> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>
> 01/01/2016 : 00:00:00 UTC : :
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[46], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[47], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[58], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[59], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[60], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[61], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[62], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : :CalParams[63], updating FPM, CalParams and
> FPM mismatch!
>
> 01/01/1970 : 00:00:00 UTC : File src/cal_params.c : Li
>
> 01/01/2016 : 00:00:00 UTC :
>
> *******SYSTEM STARTUP*******
>
> System Reset Exception -- Watchdog Reset
>
> Software Version : CANOPY 15.0.2 SM-DES
>
> Board Type : P11
>
> Boot Bank : 0
>
> Board Temperature : 38 C / 101 F
>
> Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module -
> 0a-00-3e-bx-yy-zz
> No valid accounts configured. Using default user account
>
> FPGA Version : 061716
>
> FPGA Features : DES, Sched;
>
> 01/01/2016 : 00:00:00 UTC : :CalParams[46,47,58,59,60,61,
> 62,63,64,65,66,67,68,72,76,77], updated FPM, CalParams and FPM mismatch!
>
> FeatureKey mismatch for FKey[1]
>
> 12/31/2015 : 18:03:37 CST : :Timezone set to CST;
>
> 09/07/2017 : 01:30:24 CST : :Time Set
>
>
>

Reply via email to