Hmmm replacement or new liver. These are hard choices. Get Outlook for Android<https://aka.ms/ghei36>
On Fri, Oct 13, 2017 at 3:12 PM -0700, "Jaime Solorza" <losguyswirel...@gmail.com<mailto:losguyswirel...@gmail.com>> wrote: I am suffering mental duress from this...twelve pack of Tecate will give immediate relief...ajuaaaa On Oct 13, 2017 3:49 PM, "Mathew Howard" <mhoward...@gmail.com<mailto:mhoward...@gmail.com>> wrote: I was also stressed. I had to look and see that the ones I have sitting on the shelf were rev D... that should be worth a couple million in pain and suffering. On Fri, Oct 13, 2017 at 11:18 AM, Steve Jones <thatoneguyst...@gmail.com<mailto:thatoneguyst...@gmail.com>> wrote: the stress of this cost me 15 million dollars in pain and suffering, ill settle out of court for half that, or some beer I didnt buy any of these, but was stressed On Fri, Oct 13, 2017 at 10:20 AM, <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> wrote: I have a 30 second secondary process for these units the fixes the problem. I can do advance replacements or whatever anyone wants that was affected by this problem. From: ch...@wbmfg.com Sent: Thursday, October 12, 2017 1:26 PM To: af@afmug.com Subject: Product issue My latest GIGE-APC-HV REV F has a mechanical issue. This has only been shipping about a month. (September 16 is the date of my test results). There is a problem when installing two of these units side by side in a shelf. There may be some interference between the jack pins on one board and the jack shields of the adjacent board. This can be fixed easily and we have modified our production process to solve this problem, but we know a few of the REV F boards have shipped. Please check your inventory/received orders and let us swap it immediately. Good thing is this has the best return loss and NEXT of any product I have ever made... (Of course you can also just skip every other rack slot too...) Sorry for the problem folks.
