It's the inbound caller ID (the customer is receiving a call), not the
Outbound Caller ID.
On 11/7/2017 3:16 PM, can...@believewireless.net wrote:
The outbound CID should be set in the PBX, not the ATA.
On Tue, Nov 7, 2017 at 3:58 PM, Nate Burke <n...@blastcomm.com
<mailto:n...@blastcomm.com>> wrote:
At a customer, I just hooked up a Cisco SPA122 into an Ancient
Lucent PBX system. The customer says that caller ID is not coming
through, but it used to work with his old AT&T Lines, and it
appears to be hitting the ATA Properly. Is there a setting on
the ATA that needs to be set that older systems may be looking for?
The only settings I see for Caller ID in the ATA are Caller ID
Method, currently set to 'Bellcore(N.Amer,China)' and Caller ID
FSK Standard, set to 'Bell 202' I've never had to mess with those
settings before.
Nate
