Could have been worse...
Paul McCall wrote:
Ooopss... not OFFLIST. I hate it when that happens!
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall
Sent: Wednesday, November 8, 2017 12:37 PM
To: af@afmug.com
Cc: PDMNet Canopy Repairs <pdmnetcanopyrepa...@pdmnet.net>
Subject: [AFMUG] OFFLIST: Cambium Ethernet Port Part Number
Matt,
We will replace them for $ 45 each if you have a few of them to do at once and
that is all this wrong. It is indeed pretty straight forward, but also its not
too hard to mess up the board.
Paul, PDMNet
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt
Sent: Wednesday, November 8, 2017 11:22 AM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium Ethernet Port Part Number
It takes a lot of heat to remove one. I would rather just order the part.
Used to do a great deal of component level repairs years back.
On Wed, Nov 1, 2017 at 4:54 PM, Colin Stanners <cstann...@gmail.com> wrote:
Pmp450 SM... Unless Cambium changed something, grab a Cambium surge,
it is more expensive per port but that is two that you already had in stock.
On Nov 1, 2017 4:37 PM, "Matt" <matt.mailingli...@gmail.com> wrote:
Does anybody know the Digikey, Mouser or Jameco part number for
replacement RJ45 port on Cambium PMP450 SM? Standard 5ghz SM that
can use reflector? Have a few that are broke.
Thanks.
---
This email has been checked for viruses by AVG.
http://www.avg.com
