If you could park the end of the ruler on the case where the N connector sticks
its head out the hole, I need to know how much of the N connector is showing.
That little lip is part of the case as far as I am concerned. I have the same
boots that UBNT uses, but my N connectors are a little longer.
Here is another way to answer the question: When the N connector is screwed
all the way down and the boot is installed, how much room is there inside the
boot to accommodate a longer N connector?
From: Bill Prince
Sent: Thursday, November 16, 2017 11:45 AM
To: Motorola III
Subject: Re: [AFMUG] AF11x
Kind of hard to answer that question. The case holds the diplexers inside. The
N connector is about a 1/2" above the "case", but it's recessed inside the
little lip for the boot that UBNT uses.
Hard to describe. Maybe we need a picture?
--
bp
part15sbs{at}gmail{dot}com
On Thu, Nov 16, 2017 at 8:49 AM, <ch...@wbmfg.com> wrote:
Could someone please measure how much the N connectors protrude above the
case on an AF11x for me?
I have a case but it does not have the diplexer/duplexer filters in it.
I have cables and boots but my N connectors are slightly longer than the ones
from UBNT.
My N connector could be in danger of slightly stretching the boot if things
are too tight.
