I only remember going through lines like that once, and the signal was
erratic. This was with FSK Canopy on a reflector. All I did was
reposition the dish so the path was under the lines instead of through
them, and that cleared it right up. I don't remember the exact range,
it was across the road and across the parking lot....maybe 100-300 feet.
I think it was more about having metal objects in the path rather than
RF noise. I think the radio noise emitted by those lines would be a
multiple of 60hz, and it should become less and less significant as you
get more multiples away from 60hz. I welcome somebody smarter than me
to correct that assumption.
-Adam
------ Original Message ------
From: [email protected]
To: [email protected]
Sent: 11/16/2017 3:06:41 PM
Subject: Re: [AFMUG] High-voltage lines interference
I have never had issues, but I was always at least 200 feet away from
the power lines.
From:Craig House
Sent: Thursday, November 16, 2017 1:04 PM
To:[email protected]
Subject: [AFMUG] High-voltage lines interference
In the past we have experienced issues being near high-voltage
powerlines and being able to get a consistent or even usable connection
on wireless equipment. But it does not seem consistent. My dilemma
today has to do with the fact that I did a site survey for a customer
that wants to buy 224 acres with two houses in a cabin on it and move
here from Pennsylvania. This is all contingent on the fact that we can
get him service. He is willing to build and pay for a tower but the
only location it can be placed is within a quarter-mile of some high
tension high-voltage powerlines. At that location with a 90 foot tower
I can get him service based on software. The problem is I don’t want to
build a tower have him buy that kind of property move here from
Pennsylvania and have something like straight RF causing us not to be
able to get a link that will work. Anyone have any experience knowing
what does and doesn’t work around high voltage transmission lines?
Sent from my iPhone