Programming twice usually means there are two firmware banks and you're bringing both up to that version. I suspect there's some big change where the old firmware won't work anyway, so you need to flash twice to avoid accidentally rolling back to a firmware that won't work anymore.
Speculation, of course. ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Colin Stanners" <cstann...@gmail.com> To: af@afmug.com Sent: Tuesday, January 16, 2018 11:45:22 AM Subject: Re: [AFMUG] Exalt firmware Note: According to the ExtendAir G2 1.4.3 upgrade notes, if you have very early firmware you can upgrade your link to 1.1.0 then jump straight to 1.4.2 (which needs to be programmed in twice for reasons that I don't fully understand), then to 1.4.3. I can send you 1.1.0 firmware if you want. On Mon, Jan 15, 2018 at 3:38 PM, George Skorup < george.sko...@cbcast.com > wrote: Looking for ExtendAir G2 release 1.2.2. Anybody have it?