"used three APs Ruckus, Ubiquiti in 2.4 and 5Ghz set to 20dBm..."
I'm not worried about what the mobile device sees, I'm worried about what the AP sees from the mobile device. If it's set to 20dBm, you need to think about considering adjusting for antenna antenna gain and how that's going to effect communication. On top of that, the higher you go with power the harder it is to control your cell size - especially in a highly reflective environment like a warehouse. You may be fine in that environment with a 20 given the number of users and how good the wifi on the hand scanners is.. then again, you might not. Good luck! On Wed, Jan 24, 2018 at 2:18 PM, Jaime Solorza <[email protected]> wrote: > Don't think so > > Jaime Solorza > > On Jan 24, 2018 12:37 PM, "Josh Reynolds" <[email protected]> wrote: >> >> Power waaayyyyy too high. >> >> On Jan 24, 2018 1:31 PM, "Jaime Solorza" <[email protected]> >> wrote: >>> >>> Spent three hours...that's my son under tripod...used three APs >>> Ruckus, Ubiquiti in 2.4 and 5Ghz set to 20dBm... >>> >>> Jaime Solorza
