up up down down left right left right b a start On Thu, Jan 25, 2018 at 1:21 PM, Forrest Christian (List Account) < li...@packetflux.com> wrote:
> FYI, You can also order part # N000045L001A from cambium. See > https://community.cambiumnetworks.com/t5/PMP- > FAQ/Cable-Diagram-for-CMM4-to-450i/td-p/51655 > > On Thu, Jan 25, 2018 at 12:10 PM, Ty Featherling <tyfeatherl...@gmail.com> > wrote: > >> Thanks Forrest. I'll make some adapters. >> >> >> >> On Jan 25, 2018 1:04 PM, "Forrest Christian (List Account)" < >> li...@packetflux.com> wrote: >> >>> The gigabit won't work with the 320 without a special cable. The >>> pinning is not gigabit compatible. See below. >>> >>> In re jumper settings in general, Debbie has a hand-drawn .pdf which >>> she'll send you with the jumpers for the PowerInjector+Sync, assuming it >>> was your ticket in the ticketing system I noted earlier, if not send a >>> email into cust...@packetflux.com. It's the same drawing that josh >>> linked to, with the pinning reversed left to right. >>> >>> Generally for the 320, set it the same as the traditional cambium >>> pinouts (should come from the factory that way) (4,5-, 7,8+), and then wire >>> as follows: >>> >>> Pins 1,2,3,4,6,8 straight through. >>> Swap pins 5 and 7. I.E. pin 5 on one end of the cable goes to pin 7 on >>> the other end of the cable. >>> >>> Or put differently: on a standard 568B cable, on one end only, swap the >>> blue/white and brown/white wires. >>> >>> Personally, I like to make a little dongle with a single port keystone >>> wall jack on a short piece of CAT5 with the swap above to make it obvious >>> that an 'adapter' is place. >>> >>> >>> On Thu, Jan 25, 2018 at 11:02 AM, Ty Featherling < >>> tyfeatherl...@gmail.com> wrote: >>> >>>> Can anyone tell me the proper jumper settings to power cap320 aps from >>>> the latest SyncInjector Gigabit? I'm replacing an old model that was >>>> designated for Canopy430 and I don't want to blow up my radios or my SI. >>>> >>>> >>>> -Ty >>>> >>> >>> >>> >>> -- >>> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>> <https://maps.google.com/?q=3577+Countryside+Road,+Helena,+MT+59602&entry=gmail&source=g> >>> forre...@imach.com | http://www.packetflux.com >>> <http://www.linkedin.com/in/fwchristian> >>> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >>> >>> > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > <https://maps.google.com/?q=3577+Countryside+Road,+Helena,+MT+59602&entry=gmail&source=g> > forre...@imach.com | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
