We use them in our enclosures for years....hold up well Jaime Solorza
On Feb 10, 2018 4:53 PM, "Jeremy" <[email protected]> wrote: > I tried those once, and the adhesive failed in the Summer when the box got > hot. Granted, this was for another company before we were using fans. > Have any of you been using them long-term? How do they hold up over the > years? > > On Sat, Feb 10, 2018 at 10:26 AM, David Coudron < > [email protected]> wrote: > >> We have started using these zip tie saddles as well inside our >> cabinets. What we like about them besides being cheap (10 cents apiece) >> is that they have adhesive on the back for quick connection to >> metal/plastic and a screw hole for attaching to more porous material. >> Additionally you can run two zip ties through every one, which lets you >> double layer the wires over the zip tie saddle. >> >> >> >> David Coudron >> >> >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Jaime Solorza >> *Sent:* Friday, February 9, 2018 9:42 PM >> *To:* Animal Farm <[email protected]> >> *Subject:* Re: [AFMUG] tying down wires >> >> >> >> We use these sometimes in enclosures to hold wires tied down with wire >> ties especially inside our cable management systems. If required we also >> screw them into back panels. https://www.google.com/search? >> q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,p >> k100&tbm=shop&lsf=seller:100446302,rt:4,pgb:1,cid:2660621310 >> 06318401,pid:7742393566737078290,oid:2629468581556939237, >> lsfqd:0&hl=en-US&ei=Iml-WuScE4LWtQXogoKgDA&lsft=gclid:CjwKCA >> iAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_gDij9Nb3iHaSoshDcm2nnKT >> HJj7zJbApsFhoCzecQAvD_BwE >> >> >> >> On Feb 9, 2018 8:17 PM, "Adam Moffett" <[email protected]> wrote: >> >> That's robbery >> >> >> >> ------ Original Message ------ >> >> From: "Steve Jones" <[email protected]> >> >> To: [email protected] >> >> Sent: 2/9/2018 8:59:11 PM >> >> Subject: Re: [AFMUG] tying down wires >> >> >> >> it works but they run 40 some bucks around here >> >> >> >> On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <[email protected]> >> wrote: >> >> I’ve been looking for a solution like this. Neat idea. One of our guys is >> basically trying to 3d print something like this >> >> Jon Langeler >> >> Michwave Technologies, Inc. >> >> >> >> >> On Feb 9, 2018, at 6:10 PM, <[email protected]> <[email protected]> wrote: >> >> I wonder if I put one of these in the box: >> >> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit >> -GBK14CS/100175627 >> >> >> >> with the screws removed, if that would be a suitable thing to tie off >> cables coming into the box to? >> >> >> >> >> >> (not sure the image will come through) >> >> >> >> >
