Single mode. This is the issue. We already have a multimode and a singlemode fiber in the conduit. We have LC Duplex on both ends of both cables. We used to run into the upstream Cisco DeMarc. Now, we are doing a direct handoff 10G into their fiber distribution panel.
On Thu, Feb 22, 2018 at 5:04 PM, Faisal Imtiaz <fai...@snappytelecom.net> wrote: > Question:- > What is the type of existing cable you have currently in place ? > Single Mode Fiber (typically yellow jacket) or Multi-Mode Fiber (typically > orange jacket). > > > There is nothing wrong in using these adapters, they work well. There may > be a wee bit of extra loss created, nothing different than what is created > by having a 'connector'. > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > http://www.snappytelecom.net > > Tel: 305 663 5518 x 232 <(305)%20663-5518> > > Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: > supp...@snappytelecom.net > > ------------------------------ > > *From: *"Jeremy" <jeremysmi...@gmail.com> > *To: *af@afmug.com > *Sent: *Thursday, February 22, 2018 7:01:03 PM > *Subject: *[AFMUG] LC to FC Fiber Optic Adapter - Any experience? > > Have any of you ever used one of these adapters to go from LC to FC? I'm > trying to decide if I should pull a new cable or just adapt it. It is for > a 10G connection, and I don't know if the adapters are reliable or if they > are another potential point of failure. > Example: https://www.fs.com/products/12086.html > >
