Ok I'll give it a shot as soon as I can. I wish there was some real documentation that came with them or at least a link to an updated user guide.... Or am I blind and I just stuck my foot in my mouth?
On Mon, Mar 26, 2018 at 4:43 PM, George Skorup <george.sko...@cbcast.com> wrote: > Open up the injector. The jumper positions are printed on the board. Top > left I believe. > > The default is -4/5 +7/8 and PowerA input on all four ports. So if you > just plugged it in without any jumper changes, then you're pretty much > trying to put ~1.5A on a single pair (one pair positive, the other return). > That's probably ungood. > > Jumper the other two pairs so you get -4/5 +7/8 -1/2 +3/6. Try the SS > again and see if the port trips. > > On 3/26/2018 5:10 PM, Sam Lambie wrote: > > Well, since I don't have any spares of the *PowerInjector Plus Sync - > Gigabit Version,* I bought a couple as I have plans for other locations > for Medusas. In the meantime, please tell me how to make sure that the > jumpers are set correctly. > > On Mon, Mar 26, 2018 at 3:41 PM, Sam Lambie <samtaos...@gmail.com> wrote: > >> GPS is not physically connected to input of SyncInjector now daisy >> chained from the other Syncinjectors, the AP is getting timing from Syncbox >> jr via UGPS power setting on radio . Cat6 is 115' long. >> I didn't even know that jumpering was an option. I guess I have to RTFM >> for the jumper location on the syncinjector? Can you please point me to the >> manual? I have never been able to find any documentation on these things... >> >> On Mon, Mar 26, 2018 at 12:10 PM, Forrest Christian (List Account) < >> li...@packetflux.com> wrote: >> >>> Oh, and you have the injector jumpered for all 4 pairs? >>> >>> On Mon, Mar 26, 2018, 12:09 PM Forrest Christian (List Account) < >>> li...@packetflux.com> wrote: >>> >>>> Is the sync pulse disabled or no gps receiver connected? >>>> >>>> How long of a wire? >>>> >>>> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie <samtaos...@gmail.com> wrote: >>>> >>>>> Timing is being done on the Aux Port. Nothing going through the Power >>>>> Port. I'll give the Gas tube version a shot if you got it. >>>>> >>>>> On Mon, Mar 26, 2018 at 9:37 AM, <ch...@wbmfg.com> wrote: >>>>> >>>>>> OK, so grounds are related to the problem. >>>>>> >>>>>> There may be something unusual with timing pulses on the power that >>>>>> is causing the surge suppressor to fire. >>>>>> Forrest would know much more than I about that. >>>>>> >>>>>> I honestly don’t know if anyone has tried my product with a Medusa >>>>>> before. >>>>>> I have a 100% gas tube version that may solve the problem. >>>>>> >>>>>> >>>>>> *From:* Sam Lambie >>>>>> *Sent:* Monday, March 26, 2018 9:18 AM >>>>>> *To:* af@afmug.com >>>>>> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with >>>>>> Medusa >>>>>> >>>>>> I did pull it from the rack and let it float, no change, however, I >>>>>> didn't reboot it while the card was floating. >>>>>> >>>>>> On Sun, Mar 25, 2018 at 3:15 PM, <ch...@wbmfg.com> wrote: >>>>>> >>>>>>> When this gets sent.... >>>>>>> Sorry you are having difficulty. >>>>>>> >>>>>>> I would pull it from the rack and see if the interruption of the >>>>>>> ground fixes the problem. >>>>>>> >>>>>>> The issue is either noise to/from the ground. >>>>>>> or >>>>>>> Transverse impulses getting clamped. Could be something about the >>>>>>> new timing stuff that I don’t understand. >>>>>>> Forrest is probably better versed in thinking about this than I am. >>>>>>> >>>>>>> Perhaps the server got launched by Elon Musk and the time delay is >>>>>>> just accumulating. >>>>>>> >>>>>>> *From:* Sam Lambie >>>>>>> *Sent:* Sunday, March 25, 2018 6:10 AM >>>>>>> *To:* af@afmug.com >>>>>>> *Subject:* [AFMUG] mccowntech rack mount surge suppressor with >>>>>>> Medusa >>>>>>> >>>>>>> Yo smart folks, >>>>>>> >>>>>>> I put a gige APC HV rack mount surge suppressor inline with a >>>>>>> Cambium Medusa today. It booted up, got in about 20 pings and then the >>>>>>> Packetflux SyncInjector shutdown. Tried putting the Ethernet cable >>>>>>> directly >>>>>>> in the SyncInjector and it worked, just like on the bench when I tested >>>>>>> Sync (via Aux Jr) and Power- Data. I never tested a surge suppressor. >>>>>>> Which >>>>>>> ones work with the thing? >>>>>>> Chuck, What say you? >>>>>>> >>>>>>> Sam >>>>>>> >>>>>>> -- >>>>>>> -- >>>>>>> *Sam Lambie* >>>>>>> Taosnet Wireless Tech. >>>>>>> 575-758-7598 <%28575%29%20758-7598> Office >>>>>>> www.Taosnet.com <http://www.newmex.com> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> -- >>>>>> *Sam Lambie* >>>>>> Taosnet Wireless Tech. >>>>>> 575-758-7598 <%28575%29%20758-7598> Office >>>>>> www.Taosnet.com <http://www.newmex.com> >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> -- >>>>> *Sam Lambie* >>>>> Taosnet Wireless Tech. >>>>> 575-758-7598 <%28575%29%20758-7598> Office >>>>> www.Taosnet.com <http://www.newmex.com> >>>>> >>>> >> >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 <%28575%29%20758-7598> Office >> www.Taosnet.com <http://www.newmex.com> >> > > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 <(575)%20758-7598> Office > www.Taosnet.com <http://www.newmex.com> > > > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>