If you have the old MT surge suppressors with EPMP there was an issue with this and negotiation. I believe current revisions have resolved it. Also, if you are only running 20mhz channels you dont need gigabit connectivity, so you can lock ports to 100mbps to help
On Mon, Apr 30, 2018 at 12:16 PM, Josh Luthman <[email protected]> wrote: > I've got two of these with problems: http://store. > packetflux.com/powerinjector-plus-sync-gigabit-version/ > > However one of these gives me no problems: http://store. > packetflux.com/sitemonitor-4-channel-gigabit-poe-injector-controller/ > > I have a 24vdc plant going up the tower. In the box it feeds these three > Packetflux units. The 4 channel POE injector has given me 0 problems. > > I've got Cambium ePMP on the PowerInjector and it has been randomly? > rebooting units for several months. Yesterday one of the ports just > decided to turn off for 20 minutes and come right back. We've replaced the > line & radio to make sure it's the box, but all signs point to it. > > Has anyone else seen this or am I lucky in getting the only two units with > power problems on them? AFAIK sync has been just as reliable as the power > through them. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > Suite 1337 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > Troy, OH 45373 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >
