Editing mistake in the last sentence..

Now as explained above there are (N-1) interimIndices for N chars
ranging from 1 to N-1...

On Dec 29, 12:39 am, Lucifer <sourabhd2...@gmail.com> wrote:
> @sumit
>
> I think even a divide conquer approach would lead to O(N^2)
>
> I think the timing complexity equation would be as follows:
>
> T(N) = T(N/2) + k* (N/2)^2 .. here k is a constant...
>
> T(N) = O(N^2)..
>
> I think your approach is same as the 2nd approach that i have
> mentioned above...
>
> Please, correct me if am i wrong...
>
> @atul
>
> Explanation for the 2nd approach...
>
> Say, given string is "ABCD"
> Now, lets define something called interimIndex which is nothing but
> the
> position between 2 chars in a string....
>
> // Considering 1-based index..
>
> Following are the indices of the the chars in the given string..
> A - 1
> B - 2
> C - 3
> D - 4
>
> Now interimIndices are the gaps between each char as shown below,
> A 1 B ..
> B 2 C..
> C 3 D
>
> Hence, for n chars there are n-1 interimIndices
>
> Now, given an even palindrome, it means that the left half of the
> palindrome is a mirror image of the right half of the palindrome about
> an interimIndex.
>
> For ex- say the given string is dabcddcbae ...
> Now the even palindrome in the above string is abcddcba..
> Hence, the interimIndex for which "abcd" is a mirror image of "dcba"
> is 5.
>
> From now on we will refer to a palindrome through its interimIndex..
>
> Now given an interimIndex, if we want to find the longest even
> palindrome, we need to do the following:
> Say interimIndex = K, then there are K chars towards the left and N-K
> chars towards the right.
> The longest even palindrome that can be found at K will be of size
> min(K, N-K)..
> And to find the same we will check for the equality of a char on the
> left size and corresponding mirrored char on the right half...
> The check will start from the element next to interimIndex 'K' and
> proceed away from 'K'...
>
> // 1-based indexing..
> // Code to show how check for left and right half will go on around
> the interimIndex..
> int left = K;
> int right = N-K;
> int i = 0;
>
> // After the loop finishes execution the value of 2*(i+1)  will give
> the size of the longest palindrome at interimIndex 'K'..
> while (i <min(left, right))
> {
>    if (A[K - i] == A[N-K+i] )
>       ++i;
>    else
>      break;
>
> }
>
> Now as explained above there are (N-1) for N chars ranging from 1 to
> N-1...
> Hence the running cost of the while loop will depend on min(left,
> right) which is nothing but
>
> 1 + 2 + 3 + ..N/2 + N/2 + ..1 = N*(N+2)/4 = O(N^2)..
>
> On Dec 28, 4:10 pm, sumit mahamuni <sumit143smail...@gmail.com> wrote:
>
>
>
>
>
>
>
> > @atul : my approach is little modification of merge sort algo.
>
> > 1) go to middle of string and from middle goto left and right doing
> > comparisons till you find match.
> > 2) here you found some palindrome string of length n(which is even)
> > 3) now find the even length palindrome substring for left and right half
> > recursively
> > 4) compare the results of left half and right half with total string and
> > return max substring
>
> > On Wed, Dec 28, 2011 at 4:14 PM, atul anand <atul.87fri...@gmail.com> wrote:
> > > @Lucifier : could you please send you explanation whose formatting in
> > > messed up.
> > > attach a test file , having your explanation.
>
> > > btw can you check my algo mentioned above using hastable...it is just
> > > convenient way to solve this problem. complexity is same as your algo.
>
> > > On Wed, Dec 28, 2011 at 4:10 PM, Lucifer <sourabhd2...@gmail.com> wrote:
>
> > >> @above..
>
> > >> It seems the above formatting has messed up.. but the point being if
> > >> we calculate col by col u will get the values and it shall be easy to
> > >> understand...
>
> > >> @sumit
> > >> Hey, u don't u share ur NlogN approach and probably we can come up
> > >> with something better..
>
> > >> On Dec 28, 3:37 pm, Lucifer <sourabhd2...@gmail.com> wrote:
> > >> > For simplicity of understanding u can take a 2 dimensional array and
> > >> > jolt down the values ...
>
> > >> > For ex -
> > >> > Orig Str = abcddcabar
> > >> >               10    9     8     7     6     5     4     3     2    1
> > >> >          0     r     a     b     a     c     d     d     c    b    a
>
> > >> >     0   0     0     0     0     0     0     0     0    0    0     0
>
> > >> > 1  a   0            1
> > >> > 1                                      1
>
> > >> > 2  b   0                   2
> > >> > 1
>
> > >> > 3  c   0                                 1
> > >> > 1
>
> > >> > 4  d   0                                       2
> > >> > 1
>
> > >> > 5  d   0                                       1
> > >> > 3
>
> > >> > 6  c   0                                 1
> > >> > 4
>
> > >> > 7  a   0            1           1
> > >> > 1
>
> > >> > 8  b   0                   2
> > >> > 1
>
> > >> > 9  a   0            1           3
> > >> > 2
>
> > >> > 10 r    0      1
>
> > >> > All the above unfilled places are actually 0s..
> > >> > Value at (6,3) gives the longest even palindrome with value 4..
> > >> > Also, (6 -4 +1 = 3) as per the start index condition..
>
> > >> > On Dec 28, 2:35 pm, Lucifer <sourabhd2...@gmail.com> wrote:
>
> > >> > > Algo:
> > >> > > -----------
> > >> > > Take the reverse of the given string and find the continuous matching
> > >> > > substring of even length in the orig and rev str.
>
> > >> > > We need to take care of certain corner cases such as:
> > >> > > Say orig str = abadba
> > >> > > rev str = abdaba
>
> > >> > > On finding the continuous substring we will get "ab" which is not a
> > >> > > palindrome..
> > >> > > Hence to handle such cases we need need to also keep track of the
> > >> > > following:
> > >> > > 1) No. of chars matched.
> > >> > > 2) The start of the substring in orig str.
> > >> > > 3) The start of the substring in rev str when read from right to
> > >> > > left..
>
> > >> > > The above algo can be used to find all the following:
> > >> > > 1) Whether there is an even length palindrome
> > >> > > 2) Whether there is an odd length palindrome
> > >> > > 3) Longest even length palindrome
> > >> > > 4) Longest odd length palindrome
> > >> > > 5) Longest palindrome.
>
> > >> > > The below code is for longest even length palindrome.
> > >> > > I have added a comment in the code to show where to break if we just
> > >> > > want to find whether it has an even palindrome.
>
> > >> > > Time complexity is O(N^2)..
> > >> > > Space complexity O(N) ...
> > >> > > // It can as well be done in O(n^2) space but i don't see a benefit 
> > >> > > of
> > >> > > doing so..Hence, reduced it to O(N)..
>
> > >> > > Lets take an array X[N+1] and initialize it to 0.
>
> > >> > > The array will be used to record whether there is a palindrome of
> > >> even/
> > >> > > odd length ending at index OrigStr[i] and RevStr[j]..
>
> > >> > > Lets say R(i, j) = length of continuous matching substring which ends
> > >> > > at OrigStr[i] and RevStr[j]..
>
> > >> > > Hence, the recurrence would be,
> > >> > > R(i,j) = 1 + R(i-1,j-1) , if OrigStr[i] == RevStr[j]
> > >> > >         = 0, otherwise
>
> > >> > > If R(i,j) is even and greater than the current recorded longest even
> > >> > > palindrome,
> > >> > > then check the following before making the current max..(basically to
> > >> > > ensure the validity for corner cases)
>
> > >> > > // 1 - based index for ease of understanding..
> > >> > > // Basically checking for the start indices as explained above
> > >> > > say the substring length is K..
> > >> > > If ( i - k + 1 == N - j + 1) then assign it to current max
> > >> > >                                    otherwise its not a palindrome..
>
> > >> > > Code: ( written based on 1-based indexing)
> > >> > > ----------
> > >> > > char OrigStr[N];
>
> > >> > > for (int i =0; i < N+1 ; ++i)
> > >> > >    X[i] = 0;
>
> > >> > > int pStrt = 1; // to mimic the orig str
> > >> > > int pRev = N;  // to mimic the rev str
>
> > >> > > int currMax = 0;
>
> > >> > > while ( pRev > 0)
> > >> > > {
> > >> > >   for ( pStrt = N; pStrt >=1 ; --i)
> > >> > >   {
> > >> > >      if ( OrigStr[pStrt] == OrigStr[pRev] )
> > >> > >      {
> > >> > >         X[pStrt] = 1 + X[pStrt - 1];
> > >> > >         if ( (X[pStrt] % 2 == 0) &&
> > >> > >              (currMax < X[pStrt]) &&
> > >> > >               (pStrt - X[pStrt] + 1 == pRev)
> > >> > >         {
> > >> > >             currMax = X[pStrt];
> > >> > >            // In case u r looking for any even length palindrome
> > >> > >            // then break out from the entire loop..
> > >> > >            // Also, if u want to find the exact characters u can do 
> > >> > > so
> > >> > > by storing
> > >> > >            // pStrt in a variable.. Using the currMax and pStrt you
> > >> > > can get the
> > >> > >            // exact palindrome..
> > >> > >         }
> > >> > >      }
> > >> > >      else
> > >> > >         X[pStrt] = 0;
> > >> > >   }
> > >> > >   pRev -- ;
>
> > >> > > }
>
> > >> > > On Dec 28, 10:57 am, sumit mahamuni <sumit143smail...@gmail.com>
> > >> > > wrote:
>
> > >> > > > Here I can think of O( n * log n ). can anyone think of better
> > >> solution??
>
> > >> > > > On Tue, Dec 27, 2011 at 11:06 PM, atul007 <atul.87fri...@gmail.com>
> > >> wrote:
> > >> > > > > Given a string of length N, find whether there exits an even
> > >> length
> > >> > > > > palindrome substring.
> > >> > > > > what would be efficient way of solving this problem.?
>
> > >> > > > > --
> > >> > > > > You received this message because you are subscribed to the
> > >> Google Groups
> > >> > > > > "Algorithm Geeks" group.
> > >> > > > > To post to this group, send email to algogeeks@googlegroups.com.
> > >> > > > > To unsubscribe from this group, send email to
> > >> > > > > algogeeks+unsubscr...@googlegroups.com.
> > >> > > > > For more options, visit this group at
> > >> > > > >http://groups.google.com/group/algogeeks?hl=en.
>
> > >> > > > --
> > >> > > > Thanks and Regards,
>
> ...
>
> read more »

-- 
You received this message because you are subscribed to the Google Groups 
"Algorithm Geeks" group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to 
algogeeks+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/algogeeks?hl=en.

Reply via email to