Hello Hamit,
Yes, I have flashed many devices etc, so I had put a cable in even though the
batteries are newish. I did get the prompts and it did state the update was
complete.
Here’s the text from the notes but they don’t mean that much as the images have
been stripped. I will get AIRA on the job later:
Outputting tone signals when starting and stopping recording (sound marker
function)
When starting and stopping recording, the
When recording audio for video with the
can output tone signals (sound markers).
, by inputting tone signals into the camera recording, aligning the audio with
the video will be easier.
Setting the "Mode"
Use to select the conditions for outputting sound markers and press
1. Press
2. Use
and press
3. Use
Marker" and press
4. Use to select a menu item and press
to select "REC"
NOTE
Markers will not be output when the overdubbing or voice memo functions
is in use.
to select "Sound
Setting the "Sound"
Use to select the type of sound marker and press
Setting the "Level"
Use to set the sound marker level and press
07
ver.2.0 Outputting tone signals when starting and stopping recording (sound
marker function)
--- 112 ---
> On 19 May 2020, at 02:17, Hamit Campos <hamitcam...@gmail.com> wrote:
>
> Hi Gena. Well then yes. Hold the play button as you boot up, When that menu
> comes up scroll to yes press that menu lever in and bingo. Just leave it be
> after that. The screen will let you know when it’s done. Oh plug it in by the
> way. John doesn’t say this but just to be safe and not take the chance of
> bricking the recorder. What demo of Neal’s are you asking about? If the H6 he
> did use the NT1-A in it mostly at the beginning but he used it most in this
> podcast. Now if the F6 well now rode NT1-A into an F6 would be super awesome.
> We’ll see what he does as he just got it a few days ago. Also his site is
> having a page repaired.
>> On May 18, 2020, at 2:51 PM, Hamit Campos <hamitcam...@gmail.com> wrote:
>>
>> Hi Gena. Better YouTube it as John did a vid on how to do it. But here’s
>> what I seem to remember John saying. As you pull the switch to power up hold
>> the play button down. Wait until that upgrade screen comes up. use the menu
>> lever to go to okay and then I guess just leave it be. Again best YouTube
>> how to upgrade H6 to be safe.
>>
>> Sent from my iPhone
>>
>>> On May 18, 2020, at 2:28 PM, Georgina Joyce <g...@gena-j.me.uk> wrote:
>>>
>>> Hello,
>>>
>>> Thanks for the heads up. Does anyone know what buttons are required? They
>>> have used graphics to show the button to be held while turning on and the
>>> button to be pressed to confirm.
>>>
>>> Thanks,
>>>
>>>
>>>>> On 18 May 2020, at 18:55, Hamit Campos <hamitcam...@gmail.com> wrote:
>>>>
>>>> Ah thanks for that. I haven’t checked the Zoom website in a wile. They
>>>> must’ve written a new firmware at some point. When did you down load this?
>>>> Well then for whom ever started this thread that’s 1 less worry my friend.
>>>> Now we’ll know what the hell we’re doing with the thing. Lol! I’ll also
>>>> have to give Zoom a congrats call. Yes I do that. I did when they did it
>>>> with the F recorders.
>>>> I also said you’ve taken your first step. Like Olympus did. Hopefully you
>>>> all can get to talking menus and settings at some point.
>>>>>> On May 18, 2020, at 12:56 PM, Aidan <aidan.smartt...@gmail.com> wrote:
>>>>>
>>>>> It is werth noticing that you must update the h6 firmware
>>>>> Then you will find that there are beeps for recording/stopping.
>>>>>
>>>>>> On Sat, 16 May 2020 at 15:10, Hamit Campos <hamitcam...@gmail.com> wrote:
>>>>>>
>>>>>> Hi Mike. Well if you are like me and get totally lost without speach no
>>>>>> it ain't accessible but for arming and disarming and recording and
>>>>>> stopping. There are no beeps so if you pause your recording you'd better
>>>>>> remember you did to either re-start or not pause a recording by axident.
>>>>>> I've done just that. Now I don't wana sound like it's tottaly not usable
>>>>>> at all. I do have 1. It is unusable if you don't like to have headphones
>>>>>> on and again if menus not talking confuses you if you don't have someone
>>>>>> to read them. So tip 1 from me keep headphones handy. This way you can
>>>>>> hear the mics come on if you light them up. Or you can hear if you use
>>>>>> the XLRs weather they are stereo linked or not. I keep asking zoom to
>>>>>> please oh please at least have someone sit in a studio like Olympus did.
>>>>>> Because I think a speach synth would cost more no? Now the F6 is like
>>>>>> the older and at this point some of the cheeper Olympus recorders. It
>>>>>> does beep for starting pausing and stopping recordings, It beeps for low
>>>>>> batteries oh yeah and that's another thing no warning from the H6. It
>>>>>> just saves the file and dies. Yes obviously the screen shows the battery
>>>>>> but again these things don't speak. So in any event back to the F6 for a
>>>>>> second and the F8N for that matter. There's another beep for something
>>>>>> else that I can't remember right now but the point is that those at
>>>>>> least do those few beeps like the earlier before the DS recorders
>>>>>> Olympus. Now you can call the Aira people or use Be My Eyes. That's what
>>>>>> I've done. I also have my neice Abby help me too.
>>>>>>
>>>>>>> On 5/16/2020 8:24 AM, Mike Busboom wrote:
>>>>>>> Hello everyone,
>>>>>>>
>>>>>>> I have been noticing a lot of discussion about the Zoom H6, so I know
>>>>>> that it can be used by blind people. Does anyone know of a podcast which
>>>>>> specifically discusses the level of accessibility of this unit. Does the
>>>>>> unit have voice guidance such as many Olympus recorders, or is there a
>>>>>> different approach to use from a blindness perspective?
>>>>>>>
>>>>>>> With thanks in advance,
>>>>>>>
>>>>>>> Mike
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>> Gena
>>>
>>> Call: M0EBP
>>> DMR ID: 2346259
>>> Loc: IO83PS
>>> 73
>>>
>>>
>>>
>>>
>
>
>
Gena
Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3294): https://groups.io/g/all-audio/message/3294
Mute This Topic: https://groups.io/mt/74247490/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
