On 2/18/2021 6:27 PM, stewartross via groups.io wrote:
hi thanks for the link ill take a look i use my mixer for radio broadcasting.any idea where i can get a limiter from that can go inline from mic to mixer.regards stewart ----- Original Message ----- From: "tim cumings" <thcumi...@comcast.net> To: <all-audio@groups.io> Sent: Thursday, February 18, 2021 9:02 PM Subject: Re: [all-audio] podcasting, any tips?Here's the amazon link to the fethead. TRITON AUDIO FetHead in-Line Microphone Preamphttps://www.amazon.com/TRITON-AUDIO-FetHead-Microphone-Preamp/dp/B06XDPTDN5/ref=mp_s_a_1_1?dchild=1&keywords=fathead&qid=1613681831&sr=8-1 All you need is a standard xlr microphone cable to connect to the microphone on one end and between the fethead and the mixer on the other end. I would not bother putting a limiter in line with your microphone. I would adjust the levels onyour mixer so that you are not clipping whenyou record.On 2/18/2021 3:05 PM, stewartross via groups.io wrote:hi ok how do u connect the fethead to the mic and the mixer if it needs no cables.re limitingi wanted to put a little bit of limiting for the mic, that goes in to the mixer.where canu get a fethead from, what make and model do i need.if anyone noes of anywhere where i can obtain a limiter for my mic, that would be most helpful.regards stewart ----- Original Message ----- From: "Georgina Joyce" <g...@gena-j.me.uk> To: <all-audio@groups.io> Sent: Thursday, February 18, 2021 7:55 PM Subject: Re: [all-audio] podcasting, any tips? Hello,My understanding is that there are very few mixers that can amplify the signal enough on the quiet mics like the SM7B. Many will go high enough but all the amp noise and hiss is awful. So you could use a cloud lifter or a fethead. I have experience with a fethead which are neat devices. The advantage with a fethead is that it is an inline device so no additional cables are required. I understand the cloud lifter is a box with XLR sockets which means you need 2 leads to use 1 mic. I think it requires a power source too. The fethead requires fantom power turned on.Regards, GenaOn 17 Feb 2021, at 10:30, stewartross via groups.io <stewartross=sky....@groups.io> wrote:hi so do i need to by something extra with the shure SM7B? and if so what do i need to by. i have of something called cloud, what does this do and wat one do i get?regards from stewart----- Original Message ----- From: "Georgina Joyce" <g...@gena-j.me.uk <mailto:g...@gena-j.me.uk>>To: <all-audio@groups.io <mailto:all-audio@groups.io>> Sent: Wednesday, February 17, 2021 9:02 AM Subject: Re: [all-audio] podcasting, any tips? Hello,Be careful as there are a number of fakes around. It is the Michael Jackson preferred mic. It needs very good mic gains as its output is low. So the mic gains have to be turned up.Regards,On 17 Feb 2021, at 07:07, stewartross via groups.io <stewartross=sky....@groups.io> wrote:r yes just got a windshield for my shure sm58 mic. has anyone ever used a shure SM7B?and if so what can u say aboute the mic as i am thingking aboute getting one.----- Original Message ----- From: "Brian Olesen" <br...@blindkom.dk <mailto:br...@blindkom.dk><mailto:br...@blindkom.dk <mailto:br...@blindkom.dk>>> To: <all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>>>Sent: Tuesday, February 16, 2021 9:42 PM Subject: Re: [all-audio] podcasting, any tips? Hi, And a wind shield. -----Oprindelig meddelelse-----Fra: all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>> <all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>>> P� vegne af Georgina JoyceSendt: 16. februar 2021 22:02Til: all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>>Emne: Re: [all-audio] podcasting, any tips? Hello David,Your recordings will sound better if you give a little thought to damping audio refections. It is amazing what a few cushions and a blanket draped over a door can do. Your fan is probably being recorded because there are plenty of hard surfaces to bounce the audio around. Introduce plenty of soft furnishings to stop the sound from being reflected. Also change the angle of hard surfaces if you can. Because if you have 2 parallel surfaces sound just bounces backwards and forwards and is amplified. By having a door half open, will reflect the sound in a different direction. There are many DIY acoustichood youtube videos. From a simple cardboard box to things a lot moreelaborate. Sound also bounces from floor to ceiling. Stand on a soft rug or something to stop the bounce. A cardboard box tippled up on its sided with your bed pillow inside and against the back of the box will have a dramaticchange to the recording.It is a lot easier to stop it being recorded in the first place than toremove it.. Regards, GenaOn 16 Feb 2021, at 20:25, David Mehler <dave.meh...@gmail.com <mailto:dave.meh...@gmail.com>> wrote:Hello, Thanks. I can do a segment of just the background fan audio. It's a standard box fan on the high setting if that helps.I can do a segment, how long, and when I have just that segment what next?Thanks. Dave.On 2/16/21, JM Casey <jmca...@teksavvy.com <mailto:jmca...@teksavvy.com><mailto:jmca...@teksavvy.com <mailto:jmca...@teksavvy.com>><mailto:jmca...@teksavvy.com <mailto:jmca...@teksavvy.com><mailto:jmca...@teksavvy.com <mailto:jmca...@teksavvy.com>>>>wrote:Hey David.Sorry, EQ is just short for "equalisation", which I should have used.It just means applying an equalizer to the tracks to bring out the desired frequencies. You may not need it, depending on how yours sounds after you record. What kind of background noise is it? It's easy to remove hums and steady machine-like sounds. You should record a section of nothing but the noise, then apply a noise reduction thing to reduce that particular noise/set of frequencies. I record on my desktop and thefans are fairly noisy -- the noise reduction filter drops that out prettynicely.For podcasting, consider another microphone -- a unidirectional one that will just pick up your voice/what's directly in front of it. That said I don't use one of those currently, but one of those snowball mics -- it does pick up sound from all around it, but it's quiet around here as it's just me in this place, so it works ok. Still, a more studio-oriented mic would be ideal. -----Original Message-----From: all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>> <all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>>> On Behalf Of DavidMehler Sent: February 15, 2021 07:24 PMTo: all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>>Subject: Re: [all-audio] podcasting, any tips? Hello, Thanks for your reply. What I did with my first go was to make thepodcast then use goldwave's maximize volume option to get the volumeto zero db without clipping. I have been reading, and listening to tutorials and presentations since my first podcast and have learned about vst plugins, that's where I wondered about a compressor. I've also got some backgroundnoise that my phone microphone picks up. It's from another room about ten feet maybe 15 feet away I'm actually surprised the mic got it, ifpossible i'd like to filter that out. Can you explain EQ? Thanks. Dave.On 2/15/21, JM Casey <jmca...@teksavvy.com <mailto:jmca...@teksavvy.com><mailto:jmca...@teksavvy.com <mailto:jmca...@teksavvy.com>>> wrote:Crazy volume differences are one of my pet peeves listening to podcasts. I like to listen to them while doing stuff around thehome, with my desktop PC broadcasting to my bluetooth headphones. Itworks great until someone inserts an audio clip from somewhere, or there's a guest on, whose volume is so different from that of the main host -- either loud enough to burst my eardrums or so quiet Ihave to crank it and then quickly turn down again when the clip is over.Anyway, you say you're already using plugins and doingpost-processing. Is that not working out for you? What are you doingto the audio exactly? Noramlising audio volume? For your speaking voice, a bit of compression might be nice, but Ithink eq is maybe the most important thing to apply -- in my opinionyou want to bring out the higher frequencies of the human voice a bit, to make things like sibilances clear and well-defined but notso sharp that they're distorting (this shouldn't happen so much witha good microphone, anyway). -----Original Message-----From: all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>> <all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>>> On Behalf Of DavidMehler Sent: February 15, 2021 06:43 PMTo: all-audio@groups.io <mailto:all-audio@groups.io> <mailto:all-audio@groups.io <mailto:all-audio@groups.io>>Subject: [all-audio] podcasting, any tips? Hello,I'm dipping in to podcasting. I've made and submitted one, but thinkI could do better. The podcast is a demo which is recorded on my s10+ using amazingmp3 recorder, and demoing features of the phone so it's also talking.One thing I've noticed is sometimes the audio isn't right, it'seither to loud or not loud enough, I've maximized volume. I am using goldwave6 with some added-vst-plugins for post-processing. The filesare recorded as wav files then saved as 44.1Khz 64Kbps mp3 files. I thought about giving a compressor a go to make my voice crisper and the phone volume more even as well, but don't want to smash things to soundly. I'd appreciate any tips. Thanks. Dave.Georgina Call: M0EBP DMR ID: 2346259 Allstar: 52178 Locater: IO83PSGeorgina Call: M0EBP DMR ID: 2346259 Allstar: 52178 Locater: IO83PSGeorgina Call: M0EBP DMR ID: 2346259 Allstar: 52178 Locater: IO83PS
-=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#3820): https://groups.io/g/all-audio/message/3820 Mute This Topic: https://groups.io/mt/80667573/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
