To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=68879
------- Additional comments from [EMAIL PROTECTED] Wed Aug 23 07:46:21 -0700 2006 ------- Step by step description: - Save and open the attached Draw document - enabling macros Click on the click me button to run a macro using "com.sun.star.drawing.MeasureShape" to draw dimensions increasing in size as they are drawn diagonally down the page. You sould see that dimensions are incorrect, both in terms of start point and dimension text, when the dimension text is automatically shown to the left of the dimension. (25mm shown as 2.1mm through to 275mm shown as 191.4mm - the drawing scale is 1:10) Dimensions are correct from 300mm onwards, where the dimension text is centered above the dimension line. Hope this helps --------------------------------------------------------------------- Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
