> > >But now I've got some trouble recording from the soundcard input: >Trying to record (or using a realtime audio application >input->process->output), I cannot select the input source any more. Alsamixer shows >the capture >flag at the correct position (e.g. CD or Mic), but hw:0,0 always records the >output from PCM only. >I always record (or hear) silence until I produce some PCM output (e.g. >aplay or a BEEP in a shell). This PCM output gets looped back and I get a >non-ending loud feedback noise (sounds just like acoustic feedback noise). > In fact that I've not tested thoose part yet, so it's that they broken as consequence with all other changes done.
> >This input problem occurs with the following 2 driver versions: > >1. >alsa-driver-0.9.0rc2-bs20020731.tar.gz + >alsa-driver-0.9.0rc2-bs20020731.diff + >additional patch in mail from 1.aug.2002 > >2. >cvs snapshot 2002-08-02 >(I compiled the alsa-driver tree only using "cvscompile" and then "make >install-modules") > > >The problem seems to be related to the pcm multi support as I can use the >alsa-driver-0.9.0rc2-bs20020723.tar.gz driver version without this problem. > There where many hard && critical changes done between thoose two releases, it has probably become broken. I will investigate the "recording" part, i believe the problem is (hopefully) easy fixed. /Benny ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
