Hi! Anybody out there has managed to get this combination
working? The hdsp driver on a Hammerfall DSP works fine with
"Internal" preferred sync, but chokes when trying to sync the
card to external sources. This happens using both "ADAT1" and
"Word" as sync sources - in both cases the front panel LEDs
for ADAT1 and Word Clock light up solid when the external
source is connected. Playback fails with weird errors:

# aplay --verbose -D plughw:1 test-tones-stereo.wav
Playing WAVE 'test-tones-stereo.wav' : Signed 16 bit Little Endian, Rate 44100  
Hz, Stereo
ALSA lib pcm_hw.c:292:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed:  
Operation not permitted
aplay: set_params:787: Unable to install hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 32
CHANNELS: 2
RATE: 44100
PERIOD_TIME: (92879 92880)
PERIOD_SIZE: 4096
PERIOD_BYTES: 16384
PERIODS: 2
BUFFER_TIME: (185759 185760)
BUFFER_SIZE: 8192
BUFFER_BYTES: 32768
TICK_TIME: 10000

This is what proc has to say about the card:

# cat /proc/asound/HammerfallDSP/hdsp
RME Hammerfall DSP (Digiface) (Card #2)
Buffers: capture cf000000 playback cee00000
IRQ: 17 Registers bus: 0xf4900000 VM: 0xd09d6000
Control register: 0x100608c
Status register: 0x12c40008
Status2 register: 0xffff0041
FIFO status: 0
MIDI1 Output status: 0xffffff00
MIDI1 Input status: 0xffffff00
MIDI2 Output status: 0xffffff00
MIDI2 Input status: 0xffffff00

Latency: 4096 samples (2 periods of 16384 bytes)
Hardware pointer (frames): 0
Passthru: no
Line out: on
Firmware version: 1
Sync reference: Word/ADAT1
Sample rate: 44100

IEC958 input: Coaxial
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 NonAudio: off

IEC958 sample rate: Error flag set

ADAT1: Sync
ADAT2: No Lock
ADAT3: No Lock

-- Fernando


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Reply via email to